Craftsman 315.23538 owner manual Brush Replacement, Brush CAP Assembly

Page 28

,_ WARNING: To ensure safety and reliability, all repairs -- with the exception of the externally

accessible brushes -- should be performed by a qualified service technician at a Sears store to avoid risk of personal injury.

BRUSH REPLACEMENT

See Figure 36.

BRUSH

,D

BRUSH

CAP

BRUSH

ASSEMBLY

Fig. 36

Your saw has externally accessible brush assemblies that should be periodically checked for wear.

Proceed as follows when replacement is required:.

•Unplug your saw.

& WARNING: Failure to unplug your saw could result in accidental starting causing serious

injury.

•Remove brush cap with a screwdriver. Brush assembly is spring loaded and will pop out when you remove brush cap.

•Remove brush assembly.

•Check for wear. If worn, always replace in pairs.

Do not replace one side without replacing the other.

•Reassemble using new brush assemblies. Make sure curvature of brush matches curvature of motor and that brush moves freely in brush tube,

•Make sure brush cap is oriented correctly (straight) and replace.

•Tighten brush cap securely. Do not overtighten.

28

Image 28

Contents OwnersManual NrtlFull ONE Year Warranty on CRAFTSMAN. Compound Miter SAW GlossarySymbol Never Leave Tool Running Unat Keep Hands Away from Cutting AreaBefore Making a CUT, be Sure ALL Adjustments are Secure Avoid Awkward Operations and HandNever USE in AN Explosive Atmo If ANY Part of this Miter SAW is MissSavetheseinstructions Make Sure the Work Area has AmpleRemove the packing materials from around your saw Customer Help Line Framingsquare Combination Square Sawblade Hexkey BladePhilupsscrewdriver Know Your Compound Miter See FigureMiter Lock Handle LOCK-OFF LeverSpindle Lock Button Trigger LockPositive Stops on Miter Table Bevel Lock KnobFence SELF-RETRACTING Lower Blade GuardSee Figures 10, 11, See Figures 10Connected to power supply when you are Assembling parts, making adjustments, installingOr removing blades, or when not in use Disconnecting your saw will prevent accidentalSee Figures 13 Squaring the Miter Table to the FenceLockplatelockhandle Viewofmitertablesquarewith Fence Squaring the SAW Blade to Fence HEX BoltsFence Miter Miterplate Table Framing Squaring the Blade to Miter Table Fmiter Mounting BracketSee Figures 21 Pivot Adjustments Bevel Pivot AdjustmentDepth Stop Adjustments Depth StopPositive Stopadjustment Screwfor 0 Angles To Crosscut with Your MiterBevel Lockknob Miter Table ApplicationsSAW To Bevel CUT with Your MiterSee Figures 27 Compound Miter CUT ClampSee Figures 33 Compound Mitercut ClampSupport Long Workpieces Iece. See Figures 29Longworkrece 13-25.30 20.29 =20.00 = Cutting Crown Molding Laying Molding Flat onCutting Warped Material Right WrongClamping Wide Workpieces Wide BoardLubrication GeneralExtension Cords Brush Replacement Brush CAP AssemblyIIrl Fro Craftsman Compound Miter SAW Model Number KEY Part Descripon Guan Number KEY Part NO. NumberDescription Ouan FigureB Description Quan KEY Part NumberKEY Part NO. Number Description Quan FigureC Parts List for Figure C KEY Part Descripon Quan NumberFigureD Parts List for Figure D Sears