Wahl C13 owner manual Assembly, Qty

I.PREPARATION

B.Assembly

The compact concrete saws are shipped completely assembled and ready for use except for diamond blade, gasoline, oil, and handle bar. Inspect the saw for shipping damage. If any damage is found, contact the shipper immediately and file a freight claim. The Norton Company is not responsible for any freight-related damages. Remove the saw from the pallet. Reverse the position of the handlebars so that the handle bar sticks out towards the operator. Adjust the handlebars to the desired height. Attach the handlebars to the saw with the supplied hardware. Read and understand the remaining sections of this Owners Manual. NOTE: Do not install the blade until it is time to use the saw. ANSI regulations prohibit the transportation of any concrete saw with the blade installed.

Part #	Description	QTY
027021	Screw Din931 M10 x 25 Hex Head Cap	1
028098	Screw Din933 M10 x 65 Hex Head Cap	1
027006	Nut Din934 M10 HFX	2

7