Hazard Symbols, Damage prevention messages

Hazard Symbols

Electrical Shock!

Never touch electrical wires or components while the motor is running. Exposed, frayed or worn electrical motor and/or water pump wiring can be sources of electrical shock which could cause severe injury or burns.

Accidental Starts!

Before plugging the equipment into an electrical outlet, ensure that the ON/OFF switch is in the “OFF” position to prevent accidental starting. Unplug unit before performing any service operation.

Rotating or Moving Parts!

Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never operate the motor with covers, shrouds, or guards removed.

Damage prevention messages

Other important messages that are designed to help prevent damage to your MK Diamond 470 tile saw, other property, or the environment are preceded by the word, “notice.”

notice Your MK-470 Tile Saw or other property could be damaged if you don’t follow instructions.

California Proposition 65 Message

Sawing and drilling generates dust. Excessive airborne particles may cause irritation to eyes, skin

Warning

and respiratory tract. To avoid breathing impairment always employ dust controls and protection

suitable to the material being saws or drilled. In accordance with OSHA (29 CFR Part 1910.1200). Diamond Blades improperly used are dangerous. Comply with American National Standards Institute Safety Code B7.1 and Occupational Safety and Health Act covering: Speed, Safety Guards, Flanges, Mounting Procedures, General Operating Rules, Handling, Storage and General Machine Conditions.

Safety Label Locations

Safety labels are located according to the drawing below. The labels contain important safety information. Please read them carefully. These labels are considered a permanent part of your saw. If a label comes off or becomes hard to read, contact MK Diamond or your dealer for replacement.

Item	Location	Description	Part #
H2	Motor	GFCI Warning label	155678
H3	Motor	Receptacle warning label	154822
J3	Motor	General safety warnings	155806

470 TILE SAW

7 inch (178mm) blade capacity

The MK-470 Tile Saw is a versatile cutting machine designed to use diamond blades. Its function is to cut a variety of materials to include ceramics and certain types of stone. The MK-470 is compact and lightweight, and incorporates features found on larger professional models. This saw is engineered as a self-contained unit consisting of a powerful universal motor, removable water reservoir and water recirculating system, and quality diamond blade. The motor operates on standard 120V current, and the water pump is conveniently energized by the motor.

Motor

The MK-470 features a powerful right angle drive universal motor with the following specifications:

115V 50/60Hz	1/2 Horsepower
5.3 AMP	5,500 RPM

Maintenance free sealed pinion shaft and gear assembly

The heavy-duty pinion shaft and gear assembly are permanently lubricated and sealed within the gear box.

Cutting Head

The 7 inch (178mm) blade capacity yields a depth of cut of 1-3/4". The hinged blade guard allows easy blade changes.