9. Storage
WARNING
Never store chemicals in your sprayer for any length of time
1.Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter- clockwise. The pump handle has two locking positions, one turning clockwise and one
2.Remove cap and pour out remaining solution, then rinse all parts thoroughly with clean water.
3.Add 1/2 gallon of fresh water in tank. Pressurize, and flush pumping system by depressing trigger for at least two minutes; then drain all remaining water.
4.Always store tank clean and empty in a dry, shaded location.
10. Disposal
When disposing your machine, or chemical, be sure to allow your local regulations.
11. Parts list
BACKPACK SPRAYER
BM46I
NOTE :
1.Use RedMax/ZENOAH genuine parts as specified in the parts list for repair and/or replacement.
2.RedMax/ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
3.When placing parts orders for repair and/or replacement, check if the model name is applicable to those specified in the parts list, then use parts number described in the parts list.
4.The contents described in the parts list may change due to improvement.
5.The parts for the machine shall be supplied seven (7) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven
(7)years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.]
9