Pre-operation, Operation | RedMax HM20_letter

6. Pre-operation

NOTE

Hose clamps are not completely tight. Please tighten hose clamps prior to using.

Hose clamps are left loose to extend life of gaskets and fittings.

WARNING

Oil cap gasket before using and lubricate weekly so the gasket will seal properly and prevent chemical leaks.

Oil check valve and maintain breather hole clear of debris. Your failure to oil may can cause the tank to collapse and crack due to vacuum created by pump lubricate with "3 and 1" oil.

IMPORTANT

Before using, oil cap gasket, felt pump washer, and check valve, and maintain breather hole clear of debris. Your failure to oil, clean check valve, and maintain breather hole open to allow air into the tank, can cause the tank to collapse and crack, due to vacuum created by pump.

1.Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter- clockwise. The pump handle has two locking positions, one turning clockwise and one counter-clockwise.

2.Remove cap.

3.A unit that has been used with herbicides should never be used to spray insecticides, unless the sprayer has been properly cleaned and all other chemicals neutralized. Failure to do this could cause you to kill plants that have been sprayed. Consult with the manufacturer of the chemicals in use to obtain proper instructions.

4.Always oil the gasket on the cap of the unit, as well as the check valve. This will extend the life of the seal and is important for obtaining a proper seal with no leaks.

5.Mix solution in a separate container, following the manufacturers’ directions.

6.Pour pre-mixed solution through strainer into tank. Reinstall cap tightly.

7. Operation

•Always release pressure in the pump prior to filling, cleaning, or servicing the sprayer.

•Before opening a container of pesticide or other spray material, carefully read, understand, and follow all instructions on the label.

•Do not use flammable materials in the sprayer: they can ignite and/or explode, causing serious injury.

•Never use caustic or corrosive materials in the sprayer, which could result in damage to the unit.

•A single pumping session or 40 full strokes provides enough pressure to spray continuously for 10 mInutes - enough to completely empty tank with just two pumping sessions.

•If sprayer is fitted with pressure relief valve - this valve will release at 42 psi.

•Spray pistol may be locked in the open position for continual spraying.

■HOW TO ADJUST THE NOZZLE

•To adjust nozzle, tighten cap (turn clockwise) for fine atomized spray, or loosen (turn counter-clockwise) for coarser spray or solid stream.

■RECOMMENDED APPLICATIONS FOR

"LAWN AND GARDEN" OR "AGRICULTURE" USAGE.

Herbicide : Yes

Insecticides/Pesticides : Yes

Fertilizers : Yes

Chlorine based : Yes

Diesel : Yes

Wettable Powder : No

Stains & Sealers : Yes

Oil Based : Yes

Solvent-Based : Yes

Viscous : No

HM20_letter_801 specifications

The RedMax HM20_letter_801 is a powerful and versatile hedge trimmer designed for professional landscapers and homeowners who require efficiency and precision in their lawn maintenance tasks. Renowned for its performance and durability, this tool has become a popular choice in the market for those seeking reliable solutions for hedge and shrub trimming.

One of the standout features of the HM20_letter_801 is its robust engine. Equipped with a high-performance two-stroke engine, the trimmer offers exceptional power that enables users to tackle even the most overgrown hedges with ease. The engine is designed for fuel efficiency, allowing users to work longer without the need for frequent refueling, thus enhancing productivity during operation.

Another impressive characteristic of the HM20_letter_801 is its lightweight design. Weighing in at only a few kilograms, it is easy to maneuver, making it ideal for extended use without causing fatigue. The balance and ergonomic design ensure that users maintain a comfortable grip while operating the tool, which is crucial during prolonged hedge trimming sessions.

The cutting mechanism is equipped with dual-action blades, which significantly reduces vibration during operation. This innovation allows for cleaner and more precise cuts, giving hedges a neat and professional look. The blades are also made from high-quality steel, ensuring durability and resistance to wear and tear over time.

The HM20_letter_801 is designed with user safety in mind. It features a robust safety switch that prevents accidental start-ups, providing peace of mind while handling the tool. Additionally, the handle is designed to minimize fatigue, allowing for comfortable use even in challenging positions.

Furthermore, the RedMax HM20_letter_801 incorporates advanced technologies like anti-vibration systems, which reduce hand fatigue and improve overall user comfort. This feature is particularly beneficial during prolonged operations, ensuring that users can complete their tasks without physical strain.

Overall, the RedMax HM20_letter_801 is a highly efficient hedge trimmer that combines power, durability, and user-friendly design. Whether you are a professional landscaper or a gardening enthusiast, this tool is engineered to meet the demands of trimming hedges and shrubs, making it a valuable addition to any outdoor maintenance toolkit.