Rhino Mounts 697P, 1540 manual To the OWNER/OPERATOR/DEALER

Page 36

TO THE OWNER/OPERATOR/DEALER

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirements of tractor operators:

REQUIRED OF THE OWNER:

1.Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and

2.Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and

3.Ensure that each employee uses such Seatbelt while the tractor is moving; and

4.Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected area provided by the ROPS.

REQUIRED OF THE OPERATOR

1.Securely fasten seatbelt if the tractor has a ROPS.

2.Where possible, avoid operating the tractor near ditches, embankments, and holes.

3.Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.

4.Stay off slopes too steep for safe operation.

5.Watch where you are going - especially at row ends, on roads, and around trees.

6.Do not permit others to ride.

7.Operate the tractor smoothly - no jerky turns, starts, or stops.

8.Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.

9.When the tractor is stopped, set brakes securely and use park lock, if available.

Keep children away from danger all day, every day...

Equip tractors with rollover protection (ROPS) and keep all machinery

guards in place...

Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

Image 36
Contents 1540 To the OWNER/OPERATOR/DEALER Parts Section Parts Ordering Guide Part Name Index Cylinder HydraulicGeneral Assembly Rev Frame Skid Shoe Assembly S/N 16152-CURRENT Rev Gauge Wheel Wheel HUB Assembly Wheel HUB PT110SA Rear Blade Hydraulics Hydraulic Cylinder Rev Hydraulic CylinderCylinder Hydraulic Rev Cylinder HYD 16 STX4BOREX2RODComplete Assembly Cylinder Hydraulic8727A Hydraulic Cylinder Hydraulic Cylinder W/CLEVIS PIN Complete Cylinder W/CLEVIS PIN 5B6240 Hydraulic Cylinder Complete 0651130001 Hose Connections Hydraulic Bracket Assy Control Valve Control Valve Assembly Control Valve Open CTR Control Valve Closed CTRValve Selector Adjust Link Assembly Adjust Link AssemblyB69116B¨ Adjusting Link Manual Mainframe Swing & Moldboard PivotMoldboard Tilt Safety Decal Sheets Page SERVIS-RHINO To the OWNER/OPERATOR/DEALER Rear Blades PL 06/01 697P Printed U.S.A