Sinclair PG20 manual Change Of Dies, 8mm Die Set 12mm Die Set

Page 5

Change Of Dies

The PG-20 will take two die sets. If you want to change out sizes, you will need to replace parts. Please refer to the following diagrams.

8mm Die Set

12mm Die Set

Only used in 12mm die set.

Image 5

Contents Model PG-20 Grommet Grommet Measurements Washer Measurements IntroductionOrder to adjust the cutting pressure Refer to diagram below Installation of PG-20Adjusting both the cutting and the grommet pressure Order to adjust the grommet pressure 8mm Die Set 12mm Die Set Change Of DiesParts Schematic Schematic # Description