Parkside PSG 50 A1 Introduction, Equipment, Scope of Delivery, Proper use, Technical details

Introduction

The following pictograms are used in these operating instructions / on the device:

	Read instruction manual!	Keep children away from electrical
		power tools!
V~	Volt (AC)	Caution – electric shock!
		Danger to life!
W	Watts (Effective power)	Risk of loss of life by electric shock from
		damaged mains lead or mains plug!
n0		Wear hearing protection, dust protection
	Design no-load speed	mask, protective glasses and protective
		gloves.
	Observe caution and safety notes!	Dispose packaging and appliance in
		an environmentally-friendly way!
	Risk of explosion!!
Power carving tool PSG 50 A1		Equipment

Introduction

1ON / OFF switch

2 Bracket

3 Mains lead with plug

	Please make sure you familiarise yourself	4	Ventilation slots
	fully with the way the device works before		Tool holder
		5
	you use it for the first time and that you	6	Cap nut
understand how to handle electrical power tools cor-			Blade inserts
		7
rectly. To help you do this please read the accompa-		8	Key
nying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone			Scope of Delivery
else, please ensure that you also pass on all the
documentation.
		1 Motor carving device PSG 50 A1
Proper use		3 Blade inserts
		1 Key
		1 Operating Instructions
This carving device is intended for processing all
types of wood. For example, it can be used for			Technical details
carving, renovating furniture, refurbishing antiques,
fine paint stripping and linocuts. Any other use or
modification to the drill / grinder shall be considered		Rated voltage:		230 V~ 50 Hz
as improper use and could give rise to considerable		Power rating:		50 W
dangers. The manufacturer will not accept liability		Stroke rate when idling:		n0 11500 strokes / min
for loss or damage arising from improper use. Not

intended for commercial use.

6GB/IE