Husqvarna BP4E manual Transportation, Storage, Maintenance, Disposal

4. For safe operation

	• Keep spray materials locked up and	5. When replacing the any other part, or
	out of reach of children and animals.		any lubricant, always be sure to use only
	• Use only original manufacturer’s		Husqvarna products or products which
	replacement parts.		have been certified by Husqvarna for use
	• As a rule, mix your chemicals in a		with the Husqvarna product.
	separate container from which to fill the	6. In the event that any part must be
	sprayer. Do not mix formulas inside the		replaced or any maintenance or repair
	sprayer. Where an exception is made		work not described in this manual must
	(e.g. with liquid fertilizers), fill sprayer		be performed, please contact a
	with water BEFORE adding the active		Husqvarna authorized servicing dealer
	ingredient.		for assistance.
	• Always sift formula through the screen.	7. Do not use any accessory or attachment
	If there is no built-in strainer, use a		other than those bearing the Husqvarna
	screened funnel.		mark and recommended for the unit.
	• Never fill the sprayer with hot liquids.	8. Under no circumstances should you ever
	Max. 30°C, or 85°F.		take apart the product or alter it in any
	• Never use gasoline or other flammable		way. Doing so might result in the product
	materials.		becoming damaged during operation or
	• Before cleaning or servicing the		the product becoming unable to operate
	sprayer, allow all pressure to escape.		properly.
	Do not store or transport sprayer under
	pressure.
	• After each use, wash the sprayer—			TRANSPORTATION
	including hose, lance and shut-off
	valve—with plenty of fresh water.		• Clean and rinse tank and spraying
	Unless spraying is to be continued			assembly after each use to prevent
	within hours,			crystallizing, which would later cause
	drain chemical formula and thoroughly			clogging and chemical damage to the
	rinse the tank and all liquid ducts.			unit.
	• Never store chemicals in your sprayer		• Drain the content from the tank before
	for any length of time			transporting or storing the sprayer.
	• Do not leave the sprayer in reach of		• Secure the unit carefully to prevent
	children or persons not qualified to			movement when it is transported.
	handle it in proper fashion.		• A unit that receives a strong shock
	• When not in use—and especially			during transport and unloading may
	during prolonged storage—keep your			malfunction.
	sprayer in a protected place away from			STORAGE
	direct solar heat.
	• Make sure the spray hose loops freely		• Clean and rinse tank and spraying
	without kinking or squeezing.			assembly after each use to prevent
				crystallizing, which would later cause
4. After using sprayers and other				clogging and chemical damage to the
				unit.
	equipment, CLEAN UP! Dispose of
			• Do not store sprayer under pressure,
	debris in trash receptacles.
				or with spray solution in tank.
	MAINTENANCE		• When storing the sprayer, choose a
				space indoors free from moisture and
1. In order to maintain your product in				out of the reach of children.
	proper working order, perform the
	maintenance and checking operations			DISPOSAL
	described in the manual at regular
			• When disposing of your machine, or
	intervals.
				chemical, be sure to follow your local
2. Examine the sprayer at intervals for
				regulations.
	loose fasteners and rusted or damaged
	parts.
	Use special care for chemical leakage.
3. Clean and rinse tank and spraying
	assembly after each use to prevent
	crystallizing, which would later cause
	clogging and chemical damage to the
	unit.
4. All service except for those described in
	this manual should be performed by
	competent service personnel.

BP4E

U

S

US-5