If in ANY Doubt Please Consult AN Electrician

sg82 amend p8.qxd 19/01/00 12:35 Page 11

You will need to check the spray nozzles, piston and spring from time to time to check for wear and replace if necessary.

NEVER DISPOSE OF PAINTS OR SOLVENTS INTO DRAINS. CONTACT YOUR LOCAL COUNCIL TO ARRANGE COLLECTION.

MAINS CONNECTION

WARNING - THIS APPLIANCE MUST BE EARTHED

Your unit will have been supplied with a mains lead with a fitted moulded plug. This is identified by the fuse holder in the base of the plug. Please read the following safety instructions before use.

1 If the moulded plug is cut off from the mains lead then the plug must be disposed of safely.

NEVER under any circumstances insert such a plug into a 13 amp socket.

2 NEVER under any circumstances use the appliance without the fuse cover fitted. This is the little cover fixed into the base of the plug to hold the fuse in place.

3 If you lose the fuse cover then please contact any electrical dealer for a replacement or ring our helpline.

4 A replacement fuse must be rated at 5amp. The fuse must be manufactured and approved to BS1362.

5 IF IN ANY DOUBT PLEASE CONSULT AN ELECTRICIAN.

If you need to fit a plug to the mains lead, this should be done in accordance with the wiring instructions on the mains lead, and will need to be fitted with a 5 amp fuse. If in doubt please consult an electrician.

WARNING-If you are using an extension lead, it must be rated at a minimum of 6 amps and fully unwound. Do not operate with a lead rated at less than 6 amps as this will cause premature failure of the motor and will void your guarantee.