Grizzly T23092 Before Operating This Equipment, Safety Instructions For Spray Guns

Page 2

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if

 

 

 

 

 

 

 

 

 

 

 

 

not avoided, COULD result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if

 

 

 

 

 

 

 

 

 

 

 

 

 

 

not avoided, MAY result in minor or moderate injury.

 

 

 

 

It may also be used to alert against unsafe practices.

 

 

 

 

 

This symbol is used to alert the user to useful informa-

NOTICE

 

 

tion about proper operation of the equipment.

Safety Instructions For Spray Guns

1.READ THIS MANUAL. This gun may cause personal injury if used incor- rectly. This manual contains proper safety and operating instructions that must be followed to reduce this risk.

2.WEAR EYE PROTECTION. Material sprayed into eyes may cause seri- ous injury or blindness. Always wear safety goggles ANSI approved for spraying (sealing type) to reduce your risk from this hazard.

3.SPRAY IN VENTILATED AREA.

Airborne particles and fumes are toxic and can cause brain damage or death. To reduce your risk, only use the spray gun in a well ventilated area with adequate supply of fresh air.

4.WEAR A RESPIRATOR. Airborne material from spraying can be very hazardous to lungs. Always wear a respirator NIOSH approved for spray- ing and fumes of your material type; or use a supplied air respirator sys- tem that delivers fresh air from an outside location via hoses.

5.MAINTAIN EQUIPMENT. Pressurized spray guns or hoses may burst unex- pectedly if damaged or poorly main- tained, causing serious injury. Fix air leaks immediately and follow all recommended maintenance. Never operate this spray gun with loose or disassembled components. Never modify the spray gun.

Model T23092 High-Pressure Spray Gun

-1-

Image 2
Contents HIGH-PRESSURE Spray GUN Before Operating This Equipment SafetySafety Instructions For Spray Guns Tion about proper operation of the equipmentUSE Correct AIR Pressure ForewordSpecifications IntroductionModel T23092 Inventory Figure Fluid Cup SET UPInventoryAssembly Identification & Controls To use your spray gun OperationsSpraying Spraying technique Atomizing Cap Adjustment Pattern ControlAccessories To clean the spray gun MaintenanceCleaning Lubrication Lubrication locations Model T23092 High-Pressure Spray GunService TroubleshootingParallel T23092 Parts Breakdown 32 31 30 29 15 14Warranty