Graco 312145G important safety instructions Fire and Explosion Hazard, Equipment Misuse Hazard

Page 2

WARNING

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

Use equipment only in well ventilated area.

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

Keep work area free of debris, including solvent, rags and gasoline.

Do not plug or unplug power cords or turn power or light switches on or off when flammable fumes are present.

Ground all equipment in the work area. See Grounding instructions.

Use only grounded hoses.

Hold gun firmly to side of grounded pail when triggering into pail.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

Keep a working fire extinguisher in the work area.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS forms from distributor or retailer.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manufacturer’s replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause a serious chemical reaction and equipment rupture. Failure to follow this warning may result in death, serious injury, or property damage.

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocar- bon solvents or fluids containing such solvents.

Many other fluids may contain materials that are incompatible with aluminum. Con- tact your material supplier for verification.

2

312145G

Image 2
Contents Immediate surgical treatment Instructions/PartsSkin Injection Hazard Pressurized Equipment HazardPressurized Aluminum Parts Hazard Fire and Explosion HazardEquipment Misuse Hazard Recoil Hazard Toxic Fluid or Fumes HazardBurn Hazard Personal Protective EquipmentSystem Requirements Pressure Relief ProcedurePressure Relief Procedure GroundingTip Installation OperationCleaning/Replacing Filter Not applicable for XTR510 MaintenanceCleaning Tips/Clearing Clogs CleanupRepair Parts XTR5Gasket XTR7 Gasket Parts Technical Data Graco Standard Warranty