Graco Inc Model D, 295530, 295531, 295532, 311320G, 295533 Standard Mixing Chambers

Parts

Standard Mixing Chambers

Six standard mixing chambers are available. The following table provides a general description about use and operational performance of each chamber. Actual pattern sizes and outputs achieved may vary depending on material viscosity, hose length, condition of equipment, environ- ment, working pressure, and additional factors.

46 Size		Designed for operation in confined areas and for spraying 3/8 to 1/2-in. (.7 to
		1.3 cm) thicknesses. Gun may be held within 4 in. (10.2 cm) of target without
296594	(N-800)	blowing away freshly applied foam. Pattern diameter is approximately 4 in.,
		with gun 4-in. (10.2-cm) distance from target. Output is approximately 2 to
296584	(L-800)
296590	(L-800-LM)	3-1/4 pounds/min. (.9 to 1.5 kg/min.).
46 Size		For the same uses as above. These chambers have an increased output of
296595	(N-810)	approximately 3 to 4-1/2 pounds/min. (1.4 to 2.0 kg/min.).
296585	(L-810)
296591	(L-810-LM)
55 Size		Designed for stud areas of trucks and small- to medium-sized wall applica-
296597	(N)	tions. Pattern diameter is about 8 in. (20.3 cm), with gun 18 to 20 in. (45.7 to
		50.8 cm) from target. Output is approximately 6 to 8 pounds/min. (2.7 to 3.6
296586	(L)	kg/min.).
296592	(L-LM)
62 Size		For very large area applications. Pattern diameter is about 9 in. (22.9 cm)
296598	(N)	with gun 18 to 20 in. (45.7 to 50.8 cm) from target. Output range is about 7
		to 10 pounds/min. (3.2 to 4.5 kg/min.).
296587	(L)
70 Size		For very large area applications. Pattern diameter is about 10 in. (25.4 cm)
296599	(N)	with gun 18 to 20 in. (45.7 to 50.8 cm) from target. Output range is about 9
		to 12 pounds/min. (4.1 to 5.4 kg/min.).
296588	(L)
78 Size		For very large area applications. Pattern diameter is about 14 in. (35.6 cm)
296600	(N)	with gun 24 in. (60.9 cm) from target. Output range is about 13-1/2 to 16-1/2
		pounds/min. (6.1 to 7.5 kg/min.).
297592	(L)

311320G 29