Graco Inc ti12795a, 313317c, 256856, 257092, 256855, ti12906a Troubleshooting, Problem Cause Solution

Page 5

 

 

Troubleshooting

 

Troubleshooting

 

 

 

Problem

Cause

Solution

 

 

 

 

 

 

Orange peel finish - Paint

Pain droplets too large

• Maintain proper spraying distance, page 2.

surface not smooth

 

• Keep turbine air filters clean to allow full air

 

 

flow.

 

 

• Do not use an air hose that is too long to

 

 

provide sufficient atomization pressure.

 

 

• If droplets are still too large, reduce fluid.

 

 

 

 

Paint droplets drying too fast to prop-

Keep object being sprayed out of direct sunlight.

 

erly flow out of gun

When spraying in warmer temperatures, use a

 

 

slower evaporating solvent or a reducer.

 

 

 

 

Cold weather spraying

Keep fluid and object being sprayed as close to

 

 

room temperature as possible. When spraying

 

 

on a cold surface, most paints will become too

 

 

thick to flow properly.

 

 

 

Blushing - clear coatings

Moisture condensation is trapped in

• Allow turbine to warm up a few minutes

appear milky

lacquer when spraying in hot, humid

before spraying.

 

conditions

• Store lacquer off concrete floors, at room

 

 

temperature.

 

 

• Apply lighter coats and allow for proper dry-

 

 

ing time.

 

 

• Use a slower evaporating solvent or

 

 

reducer.

 

 

• Do not spray in windy conditions.

 

 

 

Fish eyes - small pools on

Silicone contamination from lubri-

Clean all parts with a cleaning solvent; wipe with

painted surface that will not

cants, grease, polish, or waxes on

a solvent rag and a clean rag. Replace rags as

fill

the surface being sprayed

needed. If problem persists, use a fish eye elimi-

 

 

nator.

 

 

 

Runs and sags

Applying too much paint per pass for

• Move gun faster or decrease fluid flow.

 

the drying conditions

• Maintain proper spraying distance, page 2.

 

 

• Reduce amount of thinner or use a faster

 

 

drying thinner.

 

 

 

Solvent pops or bubbles

Sprayed surface drying before sol-

• Apply fluid in lighter coats to allow for proper

 

vent gas can be released

evaporation.

 

 

• Use the recommended thinners.

 

 

• Follow the solutions for Orange Peel Finish,

 

 

Paint Droplets Too Large in this Trouble-

 

 

shooting Table.

 

 

 

313317C

5

Image 5
Contents Hvlp Edge Gun Important Safety InstructionsModels 256855, 257092 256855 257092 256856Setup Pressure Relief ProcedureComponent Identification OperationCheck Valve Troubleshooting Cleaning Spray GunCheck Valve Cleaning Do steps 1 and 2 of Poppet Valve Quick CleanInstallation Needle ReplacementRemoval Relieve pressureProblem Cause Solution TroubleshootingTechnical Data Translated Manuals PartsPart Description Qty For Graco Canada Customers Graco Standard Warranty

ti12763a, ti12905a, ti12778a, ti12766a, 256856 specifications

Graco Inc. is a leading manufacturer of fluid handling equipment known for its innovative technology and high-quality products. Among its extensive lineup, several models stand out: TI12906A, TI12910A, TI12775A, 256855, and TI12872A. Each model comes equipped with unique features and technologies tailored for different applications, primarily in painting, coating, and surface finishing industries.

The Graco TI12906A is designed for precision and reliability. It boasts advanced pressure control technology, allowing users to achieve consistent results while minimizing material waste. Its lightweight yet durable design ensures maximum mobility on job sites, making it ideal for both professional contractors and DIY enthusiasts.

In contrast, the TI12910A offers enhanced performance with its powerful pump system. This model is particularly suited for high-viscosity materials, making it an excellent choice for industrial applications. Its robust construction ensures longevity while minimizing downtime, a critical factor for commercial projects.

The TI12775A is known for its versatility. This model can handle a variety of coatings, from thin stains to heavier paints. Its adjustable pressure settings make it easy to switch between different materials, ensuring optimal results. Additionally, it features a user-friendly interface with simple controls for a seamless user experience.

The 256855 is a specialized model designed for high-efficiency spray applications. It incorporates advanced airless technology, allowing for finer atomization of coatings, resulting in a superior finish. This model is particularly popular among professionals looking to enhance productivity without compromising on quality.

Finally, the TI12872A emphasizes ergonomic design alongside performance. It features a lightweight frame that reduces user fatigue during extended use. Additionally, the unit incorporates noise-reduction technology, making it quieter than other models on the market. The TI12872A is particularly favored in residential settings where noise levels are a concern.

In conclusion, Graco Inc. offers a range of models, including the TI12906A, TI12910A, TI12775A, 256855, and TI12872A, each designed to meet the diverse needs of its users. With features ranging from advanced pressure control to ergonomic designs, these models reflect Graco's commitment to innovation and quality in fluid handling solutions. Whether for professional or personal use, Graco's products provide reliable performance and outstanding results.