Troubleshooting
Troubleshooting
Problem | Cause | Solution |
|
|
|
|
|
|
Gun fails to dispense when trigger is | Material lodged in nozzle | Follow Pressure Relief Procedure, |
actuated |
| page 5. Clear nozzle of blockage. |
|
|
|
| Material supply, hose, passages, | Check material supply settings, |
| clogged | hoses, etc. for proper material supply. |
|
|
|
|
| Verify integrity of trigger pin through |
|
| yoke. Repair or replace cartridge |
|
| assembly as necessary. |
|
|
|
Gun fails to dispense when trigger is | Tension of trigger needs adjustment | Check spring tension adjustment at |
engaged |
| rear of gun. Spring tension should be |
|
| adjusted to allow approximately 1/32 |
|
| in. of free play on trigger. |
|
|
|
|
| Verify integrity of trigger pin through |
|
| yoke. Repair or replace cartridge |
|
| assembly as necessary. |
|
|
|
| Needle and seat adapter loose or | Check that seat adapter is tightened |
| worn | firmly and flush to gun body. |
|
|
|
|
| Needle and seat adapter worn. |
|
| Replace components as necessary. |
|
|
|
Seal leakage | Packing adjustment nut not snug | Follow Pressure Relief Procedure, |
|
| page 5. Tighten packing adjustment |
|
| nut. |
|
|
|
| Worn seals and packings | Rebuild gun as necessary. |
|
|
|
Material leaks from gun inlet swivel | Worn seals | Replace seals. |
|
|
|
6 | 309739 |