Panasonic SC-AK523, SC-AK320, SC-AK520, SC-AK323 Cassettes, Recording, Playback

Cassettes
( AK520 and
AK523 only)
SUBWOOFER
DISP, –DEMO
PRESET EQ	PHONES
DECK 1	DECK 2
	DECK 1/2
, REC
	TAPE
AUX

	AUTO OFF		CLOCK /		PL AY/
			TIMER		REC
	SLEEP		CD DISP		DIMMER
DISC			ABC		DEF
		1		2		3
PROGRAM	GHI		JKL		MNO
		4
				5		6
PLAY MODE PQRS			TUV		WX YZ

Recording

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly.

Preparation:

Wind up the leader tape so recording can begin immediately.

1Press [c, DECK 2] and insert the cassette to be recorded.

Insert with the side to be recorded facing towards you and the exposed tape facing down.

2Select the source to be recorded.

Radio recording:

Tune in the station. (A page 13)

CD recording:

1Insert the CD(s) you want to record. Press [:/J, CD] and then [L, STOP].

2 Prepare the desired CD recording mode.

Remote control only

• To record programmed tracks (A do steps 1–3 on page 9

for CD-DA or steps 1–4 on page 10 for MP3).

• To record specific CDs/tracks

1. For CD-DA, do steps 1 to 2 on page 8: “To listen to

PLAY MODE

ALBUM (or)

SHIFT

S.SOUND EQ ( AK520 and AK523 only)

S.WOOFER

		7				8			9
REPE AT								SPACE
		DEL								10
						0
				CD
TUNER			CLEAR					TAPE
	BAND
				AUX
	VOL							VOL
	AL BUM						CURSOR
					REW					FF

TITLE

INTRO MARKER SEARCH ENTER

S.WOOFER

SHIFT S.SOUND EQ PRESET EQ MUTING

	specific CDs and tracks (CD Play Mode function)”.
	For MP3, do steps 1 to 2 on page 9: “CD Play Mode
	function for MP3”.
	Ensure CD is stopped.
2.	(MP3 only) For 1-ALBUM mode and 1-SONG mode:
	Press [ALBUM ( or )] to select the album.
3.	For 1-SONG mode: Press [g, REW/3] or [f,
	4/FF] to select the track.

Tape-to-tape recording:

1Press [:, TAPE] and then [L, STOP].

2Press [c, DECK 1] and insert the cassette you want to record.

3Press [a, REC] to start recording.

To stop recording

Press [L, STOP].

If the tape finishes before the CD

The CD continues playing. Press [L, STOP] to stop it.

Playback

You can use either deck 1 or deck 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes.

1Press [:, TAPE].

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2Press [c, DECK 1] or [c, DECK 2] and insert the cassette.

Insert with the side to be played	Front side
facing towards you and the
exposed tape facing down.
Close the holder by hand.

3Press [:, TAPE] to start playback.

To play on the other side of the tape, turn the tape over and press [:, TAPE].

To stop tape playback

Press [L, STOP].

To fast-forward or rewind

Press [g/REW/3] (rewind) or [f/FF/4] (fast-forward).

To select between loaded decks

Press [DECK 1/2] (remote control: [PLAY MODE]).

Note

•Tape playback is momentarily interrupted if you open the other deck.

•Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.

•Tape slack can get caught up in the mechanism and should be taken up before the tape is played.

•Endless tapes can get caught up in the deck’s moving parts if used

14 incorrectly.

To record on the other side of the tape

Turn the tape over and press [a, REC].

Reducing noise when recording AM

Remote control only

Hold down [PLAY MODE] while recording.

Every time you hold down the button: BP1 ↔ BP2

Choose the setting with the least noise.

Note

•Changes to volume and sound/field quality do not affect recording.

•You cannot open deck 1 while recording.

•You cannot fast-forward or rewind one deck while recording with the other.

•When recording an AM broadcast, sound is momentarily interrupted when you start and stop the recording.

Erasure prevention

Use a screwdriver or similar object to break out the tab.

Side A

Tab for side B Tab for side A

To re-record on a protected cassette

Cover the hole with adhesive tape.

Adhesive tape

To erase a tape

1.Press [:, TAPE] and then [L, STOP].

2.Insert the recorded tape into deck 2. Ensure there is no tape in deck 1.

3.Press [a, REC].

RQT7330