Accessories

Cleaning Brush 105749

For use in cleaning gun

Lubricant 111265

One 4 oz. (113 gram) tube sanitary (non-silicone) lubricant for fluid seals and wear areas.

Fluid Whip Hose Assembly 239622

100 psi (0.7 MPa, 7 bar) Maximum Working Pressure Eases gun movement with increased hose flexibility.

4 ft. (1.22 m) long, 3/16 in. (4.76 mm) I.D., 3/8 npsm(fbe), nylon with polyurethane cover

Whip Hose Parts Breakdown

Part No.	Description

239630	FITTING ASSY, male

239629	FITTING ASSY, swivel

061345	TUBING; 1000 ft. (305 m) roll

Fluid Hose Assembly

100 psi (0.7 MPa, 7 bar) Maximum Working Pressure 3/16 in. (4.76 mm) I.D., 3/8 npsm(fbe), nylon with polyurethane cover

Part No.		Length

239633		15 ft. (4.58 m)

239634		25 ft. (7.63 m)

Fluid Hose Parts Breakdown

Part No.	Description

239629	FITTING ASSY, swivel

061345	TUBING; 1000 ft. (305 m) roll

Air Hose Assembly

100 psi (0.7 MPa, 7 bar) Maximum Working Pressure 5/16 in. (7.94 mm) I.D., 1/4 npsm(f) swivel, nitrile

Part No.	Length

239636	15 ft. (4.58 m)

239637	25 ft. (7.63 m)

Air Whip Hose Assembly 239631

100 psi (0.7 MPa, 7 bar) Maximum Working Pressure Eases gun movement with increased hose flexibility.

4 ft. (1.22 m) long, 5/16 in. (7.94 mm) I.D., 1/4 npsm(f) swivel, nitrile

Air Hose Assembly 185353

100 psi (0.7 MPa, 7 bar) Maximum Working Pressure Optional air hose for use when higher air flow is required. 25 ft. (7.625 m) long, 3/8 in. (9.53 mm) I.D., 1/4 npsm(f) swivel, buna-n

Air Control Valve Kit 243670

Install on the gun air inlet to control both the atomizing air and the pressure in the spray gun cup (if used). 1/4 npsm x 1/4–19 BSPT.

Air Pressure Verification Kit

For use in checking air cap atomizing or pattern air pressure at various supply air pressures. Not to be used for actual spraying.

Install the kit air cap on the gun. Turn on the air to the gun, then trigger the gun and read the air pressure on the gauge.

NOTE: To be “HVLP compliant”, the atomizing air pressure must not exceed 10 psi (70 kPa, 0.7 bar).

Part No.	Orifice	in. (mm)

239609	0.030, 0.042, 0.055
	(0.762, 1.067, 1.397)

239610	0.070, 0.086
	(1.778, 2.184)

239611	0.110 (2.790)

239612	gravity

7637A

Gun Air Regulator Assy. 235119 0–100 psi (0–0.7 MPa, 0–7 bar) air regulator to control air pressure to gun.

NOTE: Installing the gun air regula- tor adds a pressure drop that could limit the air cap pressure.

7614A

Non–Swiveling Air Inlet Fitting 195065

Replaces the standard gun swivel fitting to prevent gun from rotating during operation

28 308741