Graco Inc 238144, 308215L, 222973 Fire And Explosion Hazard, Toxic Fluid Hazard

Page 4
FIRE AND EXPLOSION HAZARD

TOXIC FLUID HAZARD WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being sprayed. Refer to Grounding on page 5.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.

DKeep the spray area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the spray area.

DExtinguish all open flames or pilot lights in the spray area.

DDo not smoke in the spray area.

DDo not turn on or off any light switch in the spray area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray area.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

4 308215

Image 4
Contents Instructions - Parts List Important Safety InstructionsPart No. 222973, Series B Part No. 238144, Series BTable of Contents SymbolsWarning Symbol Caution SymbolSKIN INJECTION HAZARD MOVING PARTS HAZARDcal treatment 308215FIRE AND EXPLOSION HAZARD TOXIC FLUID HAZARDSetup General InformationPrepare the Operator Prepare the SiteSupplied Components Connect the Suction HoseConnect the Fluid Hoses and Gun Assemble ModelDetail of Air Line Connections KEY SUPPLIED WITH ALL MODELSSUPPLIED WITH MODEL 238144 ONLY COMPONENTS YOU MUST SUPPLYPressure Relief Procedure Using the Airless Spray GunOperation Packing Nut/Wet-CupPrime the Pump Set the Air and Fluid PressureShutdown and Care of the Pump Flushing1. Relieve the pressure 9. Relieve the pressureTorque to 135-169 N.m Parts Part No. 222973, Series B includes itemsPart No. 238144, Series B includes items Includes replacement items 2a-2d05914C 05914BTechnical Data CategoryData Fluid Filter/Surge Tank See manualDimensions WeightA B C Pump ModelGraco Standard Warranty Graco InformationWARRANTY SPECIAL WARRANTY FOR DURA-FLOt DISPLACEMENT PUMP LOWERS