Carrier 38TXA manual

5.Factory charge and superheat charging method are shown on unit information plate. (See Fig. 4.) R-410A refrigerant cylinders contain a dip tube which allows liquid refriger- ant to flow from cylinder in upright position. Charge R-410A units with cylinder in upright position and a commercial-type metering device in manifold hose. Charge refrigerant into suction-line.

Do not disable low-pressure switch during a condenser pump down. Compressor damage may occur if run at a negative suction pressure.

Compressor damage may occur if system is overcharged.

Service valve gage ports are not equipped with Schrader valves. To prevent personal injury, make sure valves are fully back seated before removing gage port caps. Wear safety glasses and gloves when handling refrigerant.

Do not vent refrigerant to atmosphere. Recover for system repair or final unit disposal.

CARE AND MAINTENANCE

For continuing high performance and to minimize possible equip- ment failure, it is essential that periodic maintenance be performed on this equipment. Consult servicing contractor or User's Manual for the proper frequency of maintenance. Frequency of mainte- nance may vary depending upon geographic areas, such as coastal applications.

Step 1ÐLeave User's Manual With Homeowner

Explain system operation and maintenance procedures outlined in User's Manual.

ATTENTION INSTALLERS AND SERVICE TECHNICIANS!

AIR CONDITIONER WITH R-410AÐQUICK REFERENCE GUIDE

·R-410A refrigerant operates at 50%-70% higher pressures than R-22. Be sure that servicing equipment and replacement components are designed to operate with R-410A.

·R-410A refrigerant cylinders are rose colored.

·R-410A refrigerant cylinders have a dip tube which allows liquid to flow out of cylinder in upright position.

·R-410A systems should be charged with liquid refrigerant. Use a commercial type metering device in the manifold hose.

·R-410A, as with other HFCs, is only compatible with POE oils.

·Vacuum pumps will not remove moisture from oil.

·Do not use liquid-line filter driers with rated working pressures less than 600 psig.

·Do not install a suction-line filter drier in liquid line.

·POE oils absorb moisture rapidly. Do not expose oil to atmosphere.

·Wrap all filter driers and service valves with wet cloth when brazing.

·A liquid-line filter drier is required on every unit.

·Do not use an R-22 TXV.

·If indoor unit is equipped with a TXV, it must be changed to an R-410A TXV.

·Never open system to atmosphere while it is under a vacuum.

·When system must be opened for service, break vacuum with dry nitrogen and replace filter driers.

·Do not vent R-410A into the atmosphere.

·Observe all warnings, cautions, and bold text.

·Do not use capillary tube indoor coils.

38TXA specifications

The Carrier 38TXA is a premium air conditioning solution designed for residential and light commercial applications, offering reliable performance and energy efficiency. As a standout model in Carrier's extensive lineup, the 38TXA is equipped with advanced features and technologies that ensure optimal comfort throughout the year.

At the heart of the 38TXA is its variable-speed compressor, which allows for precise temperature control and superior humidity regulation. This technology enables the unit to operate at different speeds, adjusting to the cooling demands of the space. Consequently, users benefit from improved energy efficiency, with SEER ratings often exceeding 16, contributing to reduced energy bills.

The 38TXA comes with a robust, weather-resistant cabinet that protects its internal components from the elements, enhancing durability and extending the lifespan of the unit. Additionally, it features a quiet operation mode; its sound levels are engineered to minimize noise, ensuring a peaceful indoor environment.

Another remarkable attribute of the Carrier 38TXA is its compatibility with smart home systems, allowing homeowners to integrate temperature control with other smart technologies. This connectivity is facilitated by the Carrier Comfort™ app, which provides users with the ability to adjust settings remotely, monitor energy usage, and optimize performance.

In terms of installation flexibility, the 38TXA can be easily integrated into existing HVAC systems or serve as a standalone unit. This versatility is complemented by its wide range of available sizes, catering to various space requirements.

The unit also utilizes environmentally friendly refrigerants, aligning with modern standards for sustainability. This commitment to eco-friendly practices not only meets regulatory requirements but also offers peace of mind to environmentally conscious consumers.

Overall, the Carrier 38TXA is designed with cutting-edge technologies aimed at maximizing efficiency, comfort, and convenience. Its combination of advanced features, robust design, and user-friendly connectivity make it an ideal choice for those seeking reliable climate control in their homes or businesses. With the 38TXA, Carrier continues its legacy of innovation, ensuring that customers enjoy enhanced comfort while minimizing their environmental footprint.