Graco Inc GC-1402E, GC-1402F important safety instructions Set-Up, Hose Attachment

Page 7

Set-Up

Hose Attachment

1.Push in and rotate the trigger lock to stop the trigger from being activated.

2.Attach the (black p/n 21694-25) material hose to the material inlet fitting on the back of the gun.

3.Attach the (red) atomize air tubing to the atomize air inlet fitting on the back of the gun.

5.Attach the (Clear) trigger air tubing to the trigger air inlet fitting on the back of the gun.

6.Attach the (black) AAC air tubing to the AAC air inlet fitting on the side of the gun.

7.Attach the (Red) air hose to the chopper air inlet fitting on the side of the gun.

8. Spray head assembly

4.Attach the (stainless steel p/n 20190-00) catalyst hose to the catalyst inlet fitting on the back of the gun.

T

zSee gun assy. drawings for part numbers and hdescriptions.

GC-1402E

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Formula-X Chop Contents Fire and Explosion Hazard Skin Injection Hazard Polyester Resins and Gel-Coats Methyl Ethyl Ketone Peroxide MekpSpraying and Lamination Operations Grounding Hose Attachment Set-UpRepair Kits PartsStandard Equipment Part Description NumberFormula X Chop Dispense Gun Assembly DrawingsRevision C Part Description Qty Number Formula X Chop Dispense Gun Part Description Qty NumberDaily Maintenance Pressure Relief ProcedureParts Replacement Procedure Formula X Chop Gun MaintenanceMaintenance Part Orifice Number AccessoriesIndicates that these tips are made with A2 tool steel Part Orifice Min Max Number Width Output lbs Impingement Dispense Tip Reference ChartCategory Data Technical DataGC-1402E Graco Ohio Information Graco Ohio Standard Warranty
Top Page Image Contents