Maintenance, Cleaning | Grizzly H8116 specs

SECTION 6: MAINTENANCE

Cleaning

Proper cleaning is the best way to ensure trouble free performance from your spray gun. If your gun is not thoroughly cleaned between uses, damage and poor spraying will result. Problems caused by improper cleaning are not covered by the warranty. Clean the spray gun immediately after each use.

To clean your spray gun:

1.Spray a small amount of solvent or reducer through the spray gun.

Note: Check with local laws regarding this practice. If you are spraying on a regular basis, spraying solvents into the air may be illegal. A cabinet style spray gun cleaner may be required.

2.Disconnect the gun from the air supply!

3.Unscrew the cup.

4.Use a wrench to loosen the air flow control knob, then remove the knob, the spring, and needle.

	Fluid Tip	Cup
	Atomizing	Air Flow
	Atomizing	Control
	Cap	Control
	Cap
		Spring & Needle

Figure 10. Typical disassembly for clean-

ing.

5.Unscrew the atomizing cap with your fingers and remove the fluid tip with the service wrench. The fully disas- sembled gun should look like Figure 10.

6.Rinse these parts thoroughly in sol- vent then dry with compressed air or let air dry.

Note: If the small holes in the atomiz- ing cap become blocked, soak in clean solvent. If the blockage still exists, clear the blockage with a small needle, taking great care to not enlarge or damage the hole. Damage to the hole will create a disrupted spray pattern.

7.Use the cleaning brush with solvent to clean the inner orifice and other hard to reach areas on the outside of the spray gun body.

8.Wipe the rest of the gun body with a shop towel and dry.

EXPLOSION HAZARD! Chlorinated Solvents like Tricloroethane and Methylene Chloride (methyl chlo- ride) can chemically react with alu- minum and may explode. Many parts in spray guns are made of aluminum. Read solvent label carefully before using solvent.

NOTICE

DO NOT soak the spray gun body in solvent. Prolonged exposure to sol- vent will rapidly deteriorate the spray gun washers and seals. Ignoring this notice will void your warranty.

Model H8116 Spray Gun

-13-

H8116 specifications

The Grizzly H8116 is a versatile and powerful industrial-grade horizontal band saw designed to meet the demanding cutting requirements of various materials. This machine stands out for its robust construction, advanced features, and user-friendly design, making it an ideal choice for professionals in metalworking, fabrication shops, and other industrial settings.

At the heart of the Grizzly H8116 is its powerful 1 HP motor, which ensures reliable and consistent performance for heavy-duty cutting tasks. The saw is equipped with a precision-engineered gear train that provides excellent torque, allowing it to cut through a wide range of materials, including steel, aluminum, and plastics. This makes it suitable for a variety of applications, from simple cuts to more intricate shapes.

One of the main features of the Grizzly H8116 is its adjustable cutting angle. The saw's mitering capability allows users to make precise cuts at angles from 0 to 60 degrees, providing enhanced versatility. The saw bed is designed to support longer workpieces and includes integrated rollers for smooth feeding, further increasing productivity and accuracy.

The Grizzly H8116 also features anautomatic feed mechanism, which significantly reduces manual effort while increasing efficiency. Users can adjust the feed rate according to their preferences, ensuring optimal cutting speeds for different materials. Additionally, this model boasts a heavy-duty blade guard and a built-in coolant system that helps extend blade life and improve cutting performance by keeping the work area lubricated and free of debris.

Safety is a top priority with the H8116. The machine includes emergency stop controls and a well-engineered blade tensioning system to prevent accidents. The saw is designed with an ergonomic control panel, which allows operators to easily access functions and monitor performance.

In conclusion, the Grizzly H8116 horizontal band saw is a powerful and versatile tool that combines advanced features, safety mechanisms, and user-friendly operation. Its robust construction, adjustable cutting angles, automatic feed, and safety features make it an excellent choice for any workshop looking to increase efficiency and precision in their cutting operations. Whether handling small or large workpieces, the H8116 is engineered to meet and exceed expectations, making it a valuable addition to any industrial setting.