er periodically, and if damaged, have it repaired by an authorized service facility. Keep handles dry, clean, and free from oil and grease.
5.Check Damaged Parts - Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and per- form its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by a qualified technician unless indicated elsewhere in this manual.
6.Do not use appliance for other than intended use.
7.Maintain labels and nameplates on the appliance. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
8.The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Save these instructions.
Specifications
Tank Capacity | 4 Gallons | |
|
| |
Operating PSI | 44 - 58 PSI | |
|
| |
Spray Range | 23” - 31” | |
|
| |
Flow Rate | 17 - 54 oz. (Depending | |
on Spray Head Type) | ||
| ||
Pump Type | Manual Hand Pump | |
Weight | 7 lbs. |
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Set Up Instructions
Read the entire Important Safety Instructions section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
1.Before operating any gardening ap- pliance, put on
Spray Head Selection And
Assembly:
SKU 65040 | For technical questions, please call | Page 4 |