Harbor Freight Tools 91603 Specifications, Save This Manual, Safety Warnings and Precautions

Page 2

 

Specifications

 

 

ITEM

DESCRIPTION

Overall Dimensions

7-3/4” L X 4” W X 14-1/8” H X 20-5/8” Dia.

Construction

Alloy Steel Frame

 

Zinc-Plated Spray Gun Holding Ring

Gun Holder Dimensions

Upper Holder 1-3/16” W X 1-1/2” D

 

Bottom Holder 1-3/16” W X 1-1/8” D

The Spray Gun Holder holds most cup style gravity feed spray guns. Included is a removable strainer holder to make refilling the spray cup faster and easier.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.Keep work area clean. Cluttered areas invite injuries.

2.Keep children away. Children must never be allowed in the work area. Do not let children be near this product. This product can tip over and cause injury.

3.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.

4.Use eye protection. Always wear ANSI approved impact safety goggles when using this product. Use Paint Spraying equipment in well ventilated areas. Wear a face mask and protective goggles when spraying. Avoid using near flame as most paints are combustible.

5.Do not overreach. Keep proper footing and balance at all times when using this product. Be sure this product is level after assembly.

6.Replacement parts. When servicing, use only identical replacement parts. Use of any other parts will void the warranty.

7.When spray painting always adhere to all the instructions and safety warnings provided in the painting manual of the spray gun and the paint being used.

8.Avoid sharp edges. Machined edges may cause injury if handled without caution.

Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SKU 91603

For technical questions, please call 1-800-444-3353. Page 2

Image 2
Contents Gravity Spray GUN Save This Manual SpecificationsSafety Warnings and Precautions Assembly and Usage Instructions UnpackingParts List