Getting started
Belt clip & optional headset
Install belt clip as shown below, if desired.
Snap the belt clip into the notches on both sides of the handset.
To release the belt clip from the handset, press on both flaps of the belt clip (as shown).
Pull and unlock one flap from the notch first before detaching the whole belt clip from handset.
For handsfree headset conversations, use any industry standard
2.5mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website at
www.telephones.att.com or call 1 (800)
Lift the rubber flap here.
Plug a 2.5 mm headset into the jack on the side of the handset.
Side of the handset