Troubleshooting Tips, Consumer Support | GE EGD4500, DX2300, DX4500

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or death.


■ Do not store or use gasoline or other	■ Installation and service must be
flammable vapors and liquids in the	performed by a qualified installer,
vicinity of this or any other appliance.	service agency or the gas supplier.

WHAT TO DO IF YOU SMELL GAS:

Operating Instructions

Do not try to light a match, or cigarette, or turn on any gas or electrical appliance.

Do not touch any electrical switch; do not use any phone in your building.

Clear the room, building or area of all occupants.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions carefully.

If you cannot reach your gas supplier, call the fire department.

Troubleshooting Tips

California Safe Drinking Water and Toxic Enforcement Act

This act requires the governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.

Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LP fuels.

Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized further by properly venting the dryer to the outdoors.

PROPER INSTALLATION

This dryer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, you can receive one by visiting GEAppliances.com, or by calling 800.GE.CARES (800.432.2737).

Consumer Support

■Properly ground dryer to conform with all governing codes and ordinances. Follow details in Installation Instructions.

■Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which could cause permanent damage and invalidate the warranty.

■Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.

■Remove all sharp packing items and dispose of all shipping materials properly.

Exhaust/Ducting

		Gas dryers MUST be exhausted to the outside.
	1	Gas dryers MUST be exhausted to the outside.
		Use only rigid metal 4″ diameter ductwork
	2	Use only rigid metal 4″ diameter ductwork
	2	inside the dryer cabinet. Use only rigid metal
		inside the dryer cabinet. Use only rigid metal

or flexible metal 4″ diameter ductwork for exhausting to the outside. USE OF PLASTIC OR

OTHER COMBUSTIBLE DUCTWORK CAN CAUSE A FIRE. PUNCTURED DUCTWORK CAN CAUSE A FIRE IF IT COLLAPSES OR BECOMES OTHERWISE RESTRICTED IN USE OR DURING INSTALLATION.

For complete details, follow the Installation Instructions.

DRSR483, DLSR483, EGD4500, DBXR463, EED4500 specifications

The GE DX2300 and DX4500 are advanced digital x-ray systems designed to enhance imaging capabilities in medical diagnostics. Both systems are known for their innovative technologies, high-quality imaging, and user-friendly interfaces, making them essential tools in modern radiology.

The GE DX2300 is a versatile digital X-ray system that serves as an ideal solution for a variety of clinical settings. It combines a robust design with advanced imaging technologies to deliver high-resolution images efficiently. Key features of the DX2300 include a digital flat-panel detector, which significantly improves image quality while minimizing radiation exposure for patients. The system's software algorithms provide automatic image processing and enhancements, allowing for clearer, more detailed images that facilitate accurate diagnoses. Additionally, its compact design and mobility make it suitable for both fixed and mobile applications, contributing to greater flexibility in diverse clinical environments.

On the other hand, the GE DX4500 is designed for larger healthcare facilities that require high throughput and efficiency. Its more advanced features include a larger flat-panel detector that enables imaging of larger anatomical areas in a single exposure, thus increasing patient comfort and workflow productivity. The DX4500 also incorporates digital image storage and retrieval capabilities, allowing for seamless integration into hospital networks and improving the overall management of patient data. The system's intuitive touchscreen interface simplifies operation, making it easier for technicians to navigate through various imaging protocols and settings.

Both systems utilize GE's cutting-edge imaging technologies, such as the ability to customize contrast and exposure levels based on the specific needs of each patient. These features not only enhance the quality of the images produced but also help clinicians make informed decisions more quickly and effectively.

In summary, the GE DX2300 and DX4500 represent two of the most important advancements in digital x-ray technology. With their focus on delivering high-quality images, minimizing radiation exposure, and providing user-friendly functionalities, these systems are setting new standards in diagnostic imaging. Their contributions to improved patient care and operational efficiency make them vital assets in today's healthcare landscape.