Grizzly G7947, G7948 instruction manual Safety Instructions for Machinery

Page 11

SECTION 1: SAFETY

For Your Own Safety, Read Instruction Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

WILL result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

COULD result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

MAY result in minor or moderate injury. It may also be used to alert

 

against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about

proper operation of the machine.

Safety Instructions for Machinery

1.READ THROUGH THE ENTIRE MANUAL BEFORE STARTING MACHINERY. Machinery presents serious injury hazards to untrained users.

2.ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING MACHINERY. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

3.ALWAYS WEAR AN ANSI APPROVED RESPIRATOR WHEN OPERATING MACHINERY THAT PRODUCES DUST. Wood dust is a carcinogen and can cause cancer and severe respiratory illnesses.

4.ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage.

5.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. Wear protective hair covering to con- tain long hair and wear non-slip footwear.

6.NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when running machinery.

G7947/G7948 12 Speed Floor Drill Press

-9-

Image 11
Contents G7947 G7948 Model G7947/G7948Page Table of Contents Warranty and Returns Contact Info IntroductionForeword Machine Data Sheet Other Related Information G7948 Machine Data Sheet 17-1/2 Column Lock Lever Locks table height IdentificationTable Height Crank Raises/lowers table Safety Instructions for Machinery SafetyAlways Lock Mobile Bases if Used Before Operating Machinery Safety for Drill Presses Circuit Requirements Circuit Requirements110/220V Operation Amperage Draw220V Operation GroundingExtension Cords 110V OperationUnpacking SET UPSet Up Safety Items Needed for Set UpInventory Hardware Recognition Chart Working Clearances Clean UpSite Considerations Floor LoadComponents and Hardware Needed Qty To install the table supportColumn and Base Table SupportHandles and lock levers installed Headstock is Very Heavy. You Must Assistance when movingHeadstock Spindle Drill Chuck & ArborTo assemble the drill chuck and mount it to Downfeed Handles Belt Cover Knob To install the downfeed handlesLight 110V Only To install the tableTo install a light bulb in the drill press Mobile Base Mounting Test Run Floor MountingTo make and use the base plate Recommended AdjustmentsFactory adjustments that should be verified To remove a drill bit Operation Safety Installing/RemovingTo install a drill bit OperationsLubrication Suggestions Using the Drill Bit Speed ChartChoosing Speeds To change speeds Changing SpeedsDrilling Table Tilt Depth Stop Adjusting TableTable Height Table RotationTo remove the drill chuck and arbor Arbor RemovalG5753-Drill Press Vise AccessoriesH1300 H1298 G7984 H2347 H0736 G3640-Power Twist V-Belt 1⁄2 xMaintenance Motor & Electrical ServiceAbout Service TroubleshootingPulley is loose Remove pulley Drill Press Operations Depth Stop Feed Shaft Spring Calibration Loosening cover and jam nut Electrical Components Power and light switch assemblyG7947/G7948 Wiring Diagram G7947 Stand/Table Breakdown G7947 Headstock Breakdown Description G7947 Parts ListPVA26 G7948 Stand/Table Breakdown G7948 Headstock Breakdown G7948 Parts List PVA29 Warranty and Returns Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog

G7947, G7948 specifications

The Grizzly G7948 and G7947 are powerful, professional-grade milling machines designed for precision metalworking. These models cater to the needs of machinists and hobbyists alike, combining innovation with robust features ideal for various milling tasks.

The Grizzly G7948 is a vertical mill with a large working table, allowing users to handle bigger workpieces efficiently. It features a 2 HP motor, providing a spindle speed range from 50 to 3,000 RPM, enabling operators to tackle a wide range of materials and applications. The G7948’s dovetail column ensures stability and rigidity, minimizing vibrations during operation, which is crucial for achieving precision in milling tasks.

On the other hand, the Grizzly G7947 is a versatile combination of a lathe and a mill, perfect for those looking to maximize functionality in a smaller workspace. It also boasts a robust 1 HP motor, allowing for smooth operation with adjustable spindle speeds, enhancing its versatility. The G7947 is particularly user-friendly, featuring a quick-change tool post that facilitates faster tool swapping and changeovers, which is a significant advantage when working on multiple projects.

Both models come equipped with advanced features such as a digital readout (DRO) system that aids in precision measurements. The DRO provides real-time feedback on the machine's positioning, helping eliminate guesswork and ensuring accuracy. Additionally, the machines' power feed for the table enhances efficiency, making it easier for users to execute repetitive tasks without the strain of manual cranking.

Another notable characteristic of the Grizzly G7948 and G7947 is their user-friendly controls, designed with ergonomics in mind. The intuitive layout ensures that operators can easily navigate through the machine’s settings, allowing for quicker setup times and smoother workflow.

Lastly, the sturdy construction of both milling machines means they are built to withstand rigorous use, making them reliable choices for both industrial applications and serious hobbyists. These models exemplify Grizzly's commitment to quality and performance, making them exceptional additions to any workshop.