Operating Tips and Mainte, Maintenance

OPERATING TIPS AND MAINTE-

Operating Guides and Tips

Avoid overloading the drill or sander.

Do not apply excessive pressure to the drill or sander while using. If the speed drops abnormally, decrease pressure immediately. When drilling, if the bit stops abruptly or becomes blocked, release the trigger at once. Reverse the direction to free the drill bit.

Ensure the safety of the workplace.

Clear the work area of all parts and debris that may cause injury by flying objects. Securely fix the object to be drilled or sanded in a vise or other- wise clamp to avoid injury. Do not attempt to hold workpiece by hand.

Inspect the drill or sander before use.

Run the drill before using to ensure all parts are running smoothly and there are no abnormal sounds or sparks. If any defect is found, have unit serviced.

Match your drill speed to your torque.

Use low torque and high speeds for boring through light materials. Use low torque and low speeds for driving screws into light materials. For the highest setting, combine a low speed with the “Drill Bit” symbol on the Torque Setting Ring.

Know your worksite. Only drill as deep as necessary. Check behind walls for wires, other electrical hazards, or plumbing.

Use accessories properly. Use the low- est possible torque setting when dri- ving fasteners. This will increase the life span of the driving bit and pre- vent damage to the fastener.

Maintenance

Your cordless power tool will give you hun- dreds of hours of operation time before ever needing service. The electrical com- ponents of this cordless drill are not user serviceable. Repair should always be undertaken by a qualified electrical repair technician.

Keep the drill free from dirt and grease. Always store it in a dry place, preferably in the case that is supplied.

The battery will require periodic recharg- ing, and eventually replacement after it has exceeded its recharge life (approxi- mately 800-1000 recharge cycles). You will notice extended charging times or shortened operation time as the battery experiences more cycles. Battery must

be recycled or disposed of properly.

Refer to the Grizzly catalog for replace- ment batteries.

Disassembly and improper reassem- bly of this device can result in electri- cal shock danger. Always have this device serviced by an qualified elec- trical repair technician. Serious injury will result.

G8593 14.4V Cordless Set

-10-

G8593 specifications

The Grizzly G8593 is a powerful and versatile benchtop milling machine designed to cater to the needs of both hobbyists and professionals in the metalworking industry. Known for its robust construction and precision, the G8593 has earned a reputation for being a reliable choice for milled parts, intricate designs, and a variety of machining tasks.

One of the standout features of the Grizzly G8593 is its 1 HP motor, which provides ample power for a range of materials including aluminum, wood, and plastics. The machine operates at variable speeds, allowing users to adjust the spindle speed between 100 and 2500 RPM. This flexibility accommodates different material types and thicknesses, enabling precision machining for delicate and more substantial components alike.

The G8593 boasts a spacious table measuring 31.5 inches by 7.5 inches, which offers sufficient area for working with larger workpieces while maintaining stability and accuracy during operation. The table features T-slots designed to facilitate clamping and securing materials in place, promoting safety and efficiency throughout the milling process. Additionally, the table can be adjusted in both the X and Y axes, providing enhanced control over workpiece positioning.

Equipped with a 3-axis digital readout (DRO), the Grizzly G8593 allows users to monitor and adjust the machine's movements precisely. The DRO is intuitive and easy to use, making it simpler to achieve the desired measurements and setup. The machine also comes with a 6-speeds spindle speed adjustment feature, enhancing versatility in cutting and machining operations.

Safety is a paramount concern in any workshop, and the G8593 addresses this with multiple protective features. The machine is fitted with an emergency stop button and a protective enclosure to minimize the risk of accidents during operation.

Overall, the Grizzly G8593 combines power, precision, and user-friendly features in a compact design, making it an excellent addition to any workshop. Whether you are a seasoned machinist or a beginner, this benchtop milling machine offers the performance you need to take on a variety of projects with confidence. Its durability, ease of use, and advanced technology make it a worthwhile investment for anyone looking to enhance their metalworking capabilities.