GETTING STARTED
Contents
Your Model G9908 3 Function Hammer Drill should come with:
1.Rugged plastic carrying case
2.
3.Auxiliary handle
4.Hammer chisel and spike
5.22mm drill bit
6.16mm drill bit
7.10mm drill bit
8.Depth gauge rod
9.Container of lubrication
Specifications
Model number: G9908
Drilling speed: 500 RPM
Hammer rate: 2750 BPM
Voltage: 110/120
Frequency: 60Hz
Power: 1⁄2 H.P.
Weight: 11 lbs
Max drilling capacity: 7⁄8" concrete 1⁄2" steel
13⁄8" wood
Control Location
Refer to Figure 1 for the location of the key components and controls of the machine. These controls are called out later in the manual for their specific use when operat- ing. Make sure you are familiar with the controls before using the Hammer Drill.
On/Off Trigger
Switch
Front Switch
Locking Sleeve
Back Switch
Lever
Auxiliary
Handle
Fig 1. Location of controls.
G9908 3 Function Hammer Drill |