Adjustable side handle

tighten on the drill bit. The front section of the chuck needs to be tightened firmly to ensure the drill bit is held securely.

4.To remove the drill bit, hold the rear section of the chuck firmly and rotate sharply the front section of the chuck in a anti-clockwise direction, sufficiently enough to allow the drill bit to be removed.

1.Turn the side handle clamp knob (6) anti-clockwise

to loosen the collar fully and slip it over the chuck (1) onto the drill.

2.Adjust the position of the side handle (5) to suit the application and tighten the side handle clamp knob (6) to secure it in place.

Drilling

Drilling metals

•Always clamp sheet metal.

•Support thin metal with a block of wood to avoid distorting it.

•Use a punch to mark the centre of the hole.

•Use a suitable lubricant for the material you are working on,

USE:	FOR:
Oil	Steel
Turpentine or paraffin	Aluminium
Do not lubricate	Brass, copper or cast iron

Drilling plastics and plastic coated chipboard

•Use high speed drill bits

•See drilling wood below

Drilling masonry

•This drill is not designed for drilling masonry. Purchase or hire a Hammer drill.

Drilling wood

•Clamp a piece of scrap wood to the back of your work to prevent splintering.

All drilling operations

•Mark off the centre of the hole using a centre punch or nail.

•Don’t force the drill, let it work at its own pace

•Keep the drill bit sharp.

•Reduce pressure, as the drill is about to break through the item being drilled.

Chuck replacement

The chucks of reversible drills are always fixed by a screw with a left-hand thread. The screw, which is located in the centre of the chuck, must be removed before the chuck can be removed. To remove the screw, turn it in a clockwise direction. The chuck can now be removed by unscrewing it anti-clockwise. If you have trouble removing the chuck take the drill to your nearest authorised service centre for chuck replacement.

Caution. Always ensure that the drill is switched off and the battery pack is removed before making any adjustments.

Maintenance

•Store the tools, instruction manual and where necessary the accessories in the original packaging. In this way you will always have all the information and parts ready to hand.

•Do not throw used batteries into fire or water. There is a danger of explosion! Please hand in non-working or used batteries, or tools with built-in batteries, to the environmentally-safe disposal unit at a municipal waste- disposal centre, or to your dealer.

GTX144100K specifications

Global Machinery Company has consistently impressed the industry with its innovative lineup of machinery, and the GTX144100K stands as a testament to this legacy. Designed for versatility and performance, the GTX144100K is tailored for demanding work environments, making it an essential addition to any construction, manufacturing, or landscaping operation.

One of the main features of the GTX144100K is its robust engine, known for delivering exceptional power while maintaining fuel efficiency. The machine is equipped with a high-performance motor that offers optimal torque and horsepower, allowing it to easily tackle heavy lifting and tough workloads. This is complemented by a state-of-the-art hydraulic system that ensures smooth operation and precise control, enhancing productivity on the job site.

The GTX144100K boasts a user-friendly interface that prioritizes operator comfort and safety. The ergonomic design includes adjustable seating and intuitive controls, allowing operators of all skill levels to operate the machinery with confidence. Additionally, safety features such as automatic shut-off systems and enhanced visibility mechanisms ensure safe operation in various working conditions.

In terms of versatility, the GTX144100K is designed to accommodate a wide range of attachments, including augers, buckets, and forks. This adaptability allows operators to switch between tasks quickly, maximizing efficiency and reducing downtime. The machine's compact size also facilitates operation in tighter spaces where larger machinery may be impractical.

Furthermore, the GTX144100K incorporates advanced technology that enhances its performance and functionality. Integrated telematics provide real-time data on machine performance, enabling users to monitor fuel consumption, maintenance schedules, and operational efficiency remotely. This connectivity not only helps in reducing operating costs but also aids in preventative maintenance, extending the lifecycle of the equipment.

Durability is another hallmark of the GTX144100K. Constructed with high-strength materials and engineered to withstand harsh conditions, this machine is built for resilience. Its robust chassis and reinforced components ensure longevity, making it a wise investment for any business.

In summary, the Global Machinery Company GTX144100K stands out for its exceptional power, versatility, safety features, and advanced technology. This machine is not only designed to tackle the most demanding tasks but also prioritized operator comfort and efficiency, positioning it as a frontrunner in global machinery solutions.