Grizzly G0484 owner manual Milling/Drilling, To mill a workpiece, Refer to Choosing Spindle RPM on

Page 22

Milling/Drilling

To mill a workpiece:

1. Learn about the control panel shown on Page

16 and the controls shown in Figure 16.

2. Clamp the workpiece to the milling table, and adjust the headstock to the needed height, depth of cut, and milling path.

Note: For special milling operations, loosen the headstock tilt lock nuts and rotate the headstock to the needed angle (Figure 17).

Note: If you are only milling in one direction, lock the unused table slide in place.

3. Refer to Choosing Spindle RPM on Page

19 to find the best spindle RPM, and then move the headstock levers to the appropriate spindle speed positions.

4. Unlock the headstock levers (Figure 18), and use the lift motor to position the headstock close to the workpiece.

Note: For maximum spindle rigidity while milling, keep the spindle retracted into the headstock as far as possible with the quill headstock lock levers locked and the fine feed lock knob tightened.

—For milling tighten the fine feed lock knob and use the fine feed handwheel and its scale to set the milling depth. Then lock the quill lock lever.

—For drilling, leave the fine feed lock knob loose, and use the quill feed lever handles to draw the quill and drill bit down.

5. Push the green power button.

6. Turn the rotary switch dial to F or R to select the appropriate cutting direction for the type of cutter that you are using.

7. Use the table handwheels or the power feed to move the table so the cutter enters the workpiece slowly. Refer to the power feed manual for power feed operation if required.

-20-

Failure to

follow RPM and Feed Rate

Guidelines

may threaten operator safety

from ejected parts or broken tools.

 

 

Spindle Scale

Quill Feed Lever

Fine Feed Knob

Quill Lock Lever

Fine Feed Lock Knob

Figure 16. Milling/drilling controls.

Figure 17. Headstock tilt lock.

Figure 18. Headstock lock levers. G0484 Gear Head Mill/Drill

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model G0484 Gearhead MILL/DRILL With Stand Page Table of Contents Foreword IntroductionContact Info Machine Data Sheet G0484 Gear Head Mill/Drill Identification G0484 IdentificationG0484 Gear Head Mill/Drill G0484 Gear Head Mill/Drill Additional Safety Instructions for Mill/Drills 220V Single-Phase Circuit RequirementsItems Needed for Setup SetupSetup Safety UnpackingInventory Figure Qty InventoryHex Wrenches, 4, 5, 6 mm Site Considerations Moving & Placing Base UnitMounting to Shop Floor AssemblyTo assemble your mill/drill Test Run To perform the break-in procedure Break-InOperation Safety Control Panel OperationsTable Travel Axis and Y-Axis Spindle Height ControlHeadstock Travel Axis Tooling Changes To remove tooling from the spindleChoosing Spindle Cutting Speeds for High Speed Steel HSS cutting toolsTo mill a workpiece Milling/DrillingRefer to Choosing Spindle RPM on G9324-Boring Head Combo Set AccessoriesH2689-R-8 Quick Change Collet Set G2861-Face Mill G4051-Carbide Insert for Face MillG5641-1-2-3 Blocks G9815-Parallel Set H5556-Edge Finder Set G9765-9-PC. Ball End Mill SetH3022-Measurement Tool Set H1300 H1298 G7984 H2347 H0736Weekly Maintenance MaintenanceCleaning Protecting ScheduleLubrication Ball OilersTo clean and lubricate the lead screw To change the headstock oilService TroubleshootingAdjusting Gibs Headstock gib adjusting screws left Side of headstock shownG0484 Wiring Diagram 220V Single Phase Electrical Component Index Electrocution HazardSpindle motor rotary switch Left and right view Main wiring box G0484 Gear Head Mill/Drill Table Parts Breakdown Table Parts List DescriptionColumn Parts Breakdown Column Parts List Head Parts Breakdown, Part a Head Parts Breakdown, Part B Head Parts List Feed Base Label Placement Warranty and Returns Page Page Page
Related manuals
Manual 48 pages 46.59 Kb

G0484 specifications

The Grizzly G0484 is a highly regarded wood lathe that is designed for both novice and experienced woodworkers who seek to enhance their crafting capabilities. Built with robust features and advanced technologies, the G0484 is an ideal choice for those who appreciate precision, durability, and versatility in their tools.

One of the standout features of the Grizzly G0484 is its heavy-duty construction. The cast iron bed provides stability, ensuring minimal vibration during operation, which is crucial for achieving high-quality finishes on turned pieces. This solid foundation supports various workpieces, enabling users to create intricate designs with confidence. The lathe’s weight also contributes to its overall durability, making it a reliable addition to any workshop.

The G0484 boasts a powerful 1 HP motor, which delivers ample torque to handle a variety of turning tasks, from small projects like pens and bowls to larger items such as furniture legs. With a speed range of 600 to 3200 RPM, this wood lathe allows users to adjust the speed according to the needs of their specific project, ensuring optimum results for different materials and techniques.

Another notable aspect of the G0484 is its ease of use. The ergonomic design includes features such as a sliding tailstock and convenient access to the spindle lock, making adjustments swift and straightforward. Additionally, it comes equipped with a full-length tool rest that offers excellent support for various turning tools, allowing woodworkers to achieve smooth, consistent cuts with minimal effort.

The Grizzly G0484 also showcases innovative technology in its design, including the easy-to-use digital readout for the spindle speed. This feature ensures that users can quickly see and adjust speeds as needed, further enhancing precision in their work. Furthermore, the lathe is equipped with a versatile indexing system, enabling woodworkers to create evenly spaced features on their projects, such as flutes or designs.

In summary, the Grizzly G0484 wood lathe is a remarkable machine that combines strength, flexibility, and user-friendly features. Whether you are an aspiring artisan or a seasoned professional, the G0484 stands ready to meet your turning demands, making it a valuable asset in any woodworking shop. Its robust construction, powerful motor, adjustable speed range, and thoughtful design elements position it as a leader in the woodworking industry, offering endless possibilities for creativity and craftsmanship.
Top Page Image Contents