Harbor Freight Tools 68169 Maintenance Servicing, Cleaning, Maintenance, Lubrication

Page 12

MAINTENANCE AND

SERVICING

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY

FROM ACCIDENTAL OPERATION: Turn the Trigger off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or any cleaning procedures.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and

Lubrication

1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.

2.AFTER USE, wipe the tool with a clean cloth.

3.PERIODICALLY, and after each prolonged and extensive application, blow compressed air into the motor housing slots to remove any accumulated dirt and debris.

WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.

Page 12

For technical questions, please call 1-800-444-3353.

SKU 68169

Image 12
Contents For technical questions or replacement parts, please call Hammer DrillGeneral Power Tool Safety Warnings Save this ManualSave all warnings and instructions for future reference Any power tool that cannot be controlled Drill and Impact Drill Safety Vibration Safety Grounding Double Insulated Tools Tools with Two Prong PlugsExtension Cords Symbology 25’ 50’ 75’ 100’ 150’Specifications AssemblyUnpacking Instructions for Putting Into USETool Set Up Work Piece and Work Area Set UpOperating Instructions General Operating InstructionsMetal Drilling Tips Wood Drilling TipsConcrete Drilling Tips Recommended Drill Bits SetsName To Drill Into Sizes SKU For technical questions, please callMaintenance Servicing Cleaning, Maintenance, LubricationTroubleshooting Problem Possible Causes Likely SolutionsParts List Part DescriptionQty Part Description Assembly Diagram Limited 90 DAY Warranty