2.Set the desired drill torque by turning the Torque Selector to setting 1 to 6.
The higher the number, the more the torque. Use # 6 for drilling, and the others for driving. Do this when the drill if off.
3.Set the desired drill rotation by pressing the Rotation Switch (7) for drilling or driving; Press Reverse for removing screws. Press Forward for drilling. Do this when the drill is off.
4.Press the Trigger Switch (5) in to turn the drill on.
The harder you press, the faster the rotation.
Chuck (8)
Torque Selector
Rotation Switch (7)
Trigger Switch (5)
The item numbers (in brackets) can be found on the Drill Assembly and Drill Parts List.
Maintenance
1.Use only sharp bits.
2.Keep motor air vents clean of dust and debris. Vacuum periodically.
3.Clean tool with a damp cloth and light detergent. Do not use solvents.
4.Regularly charge batteries, whether used or not.
5.Store Drill in a clean and dry area. Avoid storing in high temperature areas.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activites, contain chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. some examples of these chemicals are:
-Lead from
-Crystalline cilica from bricks and cement or other masonry products
-Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially de- signed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq. )
SKU 40209 | Page 5 |