Safety Instructions, Throttle trigger lock

SAFETY INSTRUCTIONS

Personal protective eqipment

IMPORTANT INFORMATION

•Incorrect or careless use of this machine can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand this manual.

•When using the machine you must wear protective equipment that is approved by the appropriate authorities. Personal protective equipment does not eliminate the risk of accidents, however it can reduce the effects of an injury in the event of an accident. Ask your dealer for help when choosing protective equipment.

!WARNING!

Remove your hearing protection as soon as you stop the engine, so that you can hear any noises or warning signals.

GLOVES

Gloves should be worn when necessary, e.g., when inspecting, cleaning or assembling cutting equip- ment.

EAR PROTECTION Ear protection offering sufficient dampening effect should be used.

BOOTS

Use anti-slip and stable boots.

FIRST AID KIT

A first aid kit should be close at hand.

The machine’s protective equipment

This section describes the machine‘s safety equipment, its function and how checks and maintenance are carried out to ensure that it operates correctly. (See the chapter “What is what“ to locate where this equipment is positioned on your machine.)

!WARNING!

Never use a machine with defective safety equipment. Follow the control, maintenance and service instructions described in this section.

1.Throttle trigger lock

	The throttle trigger lock is	A
	designed to prevent the	A
	designed to prevent the
	throttle from accidentally
	being engaged. The trigger
	(A) can only be pressed in, if
	the lock (B) is held in (= the
	operator holding the
	handle). When the grip on
	the handle is released the
	throttle and the throttle	B
	trigger lock return to their	B
	trigger lock return to their
	original positions. This
	takes place via two indepen-
	dent return spring systems.
	This means that the throttle
	is automatically locked in	C
	the idling position.	C
	2. Stop switch
	The stop switch (C) should	"
	be used to stop the engine.	"

4 – English