Harbor Freight Tools 38144 operating instructions Work Area, Operator

Page 4

Work Area

TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR WORK AREA IS:

Free of damp, wet or rainy conditions

Free of flammable gasses or liquids

Childproof - use padlocks, master switches and remove starter keys when not in use.

Well-lit

Clean and uncluttered

Well-ventilated

The Operator

COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. PLEASE REMEMBER:

Prevent body contact with grounded surfaces such as pipes or radiators.

Stay alert. Never operate equipment if you are tired.

Do not operate the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment/reflexes might be impaired.

Do not wear loose clothing or jewelry as they can be caught in moving parts.

Non-skid footwear is recommended.

Wear restrictive hair covering to contain long hair.

Use eye and ear protection. Always wear:

ANSI-approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. A full face shield if you are producing metal or wood filings.

Ear protectors

Keep proper footing and balance at all times.

Do not reach over or across running machines.

Always check that adjusting keys and wrenches are removed from the tool or machine work surface before plugging it in.

#38144

Page 4

Image 4
Contents Speed Drill Press Technical Specifications Unpacking#38144 REV 10/03 Work Area OperatorBefore Operating Table and Support Arm to Column Column Assembly to BaseHead to Column Installing the Drive Belt Installing the ChuckPulley Cover Knob To Adjust the Table Operation Cutting SpeedsAfter Operation Drill Speed Table Note Spindle Belt M24, Motor Belt M25Grounding/Voltage Warning Maintenance Extension Cords#38144 Parts List Pulley and Spindle Assembly Parts List Head Assembly Parts List Base and Table