Harbor Freight Tools 16 speed floor drill press, 43378 operating instructions

Page 1

16 SPEED FLOOR DRILL PRESS

Model 43378

Set up And Operating Instructions

Diagrams within this manual may not be drawn proportionally.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury. Save this MAnual.

Copyright© 2000 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Cover revised 07i

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callSafety Warnings and Precautions SpecificationsRead all instructions before using this tool Save This ManualPage Rev Vibration Hazard Drill Press Safety Warnings and PrecautionsUnpacking Assembly Head Assembly Screw B12 with a Hex Wrench Operation Setting the Depth Scale to Drill to a Specified DepthLocking the Chuck at a Specific Depth Using the Depth Scale to Measure Depth While DrillingTilting the Table Installing the Chuck and Arbor MaintenanceAdjusting the Feed Handle Return Quill Spring Removing the Chuck and ArborGeneral Maintenance Symptom Possible Cause Solution TroubleshootingHead Assembly Parts List Head Assembly Drawing Item # Description Pulley and Spindle Assembly Parts ListPulley and Spindle Assembly Drawing Base and Table Assembly Parts List Base and Table Assembly Drawing
Top Page Image Contents