JS1300 1.3mm Straight Shears |
|
| LS0714 190mm Slide Compound Saw |
|
|
|
|
|
|
•360° swivel shear head for increased manoeuvrability
•Large variable speed trigger for controlled cutting speed
•Brushes are easily accessible for fast replacement
•Lock on button for continuous operation
•Four steel slide arms on linear bearings move in two stages, to give this 190mm saw a massive 300mm width of cut
•1,010W motor
•Bevel cuts up to 45° left or 5° right perfect when you are undercutting boards for a super snug fit
JS1600 1.6mm Shears |
|
| LS1013 260mm Slide Compound Saw |
|
|
|
|
|
|
•Blade design results in no material loss
•Body grip design with a paddle switch for easy one handed operation
•A lock off switch prevents accident starting
•
•1,430W motor
•Compound and mitre cuts to 45° left and right
•Dust extraction to bag or can be connected to dust extraction system
•Self closing safety blade cover
•Constant speed control, ideal for cutting into even the hardest timbers
JS1660 1.6mm Straight Shears |
|
| LS1040 260mm Compound Mitre Saw |
|
|
|
|
|
|
•Ideal for straight cutting
•
•Heavy duty 1,650W motor
•Precision machined aluminium base, with fully calibrated angles
•Bevel cuts 45° left only
•Electric brake
•Removable safety lock button
•Dust extraction to bag or dust extraction system
JS1670 1.0mm Straight Shears |
|
| LS1214 305mm Slide Compound Mitre Saw |
|
|
|
|
|
|
•Cuts close curves, right or left, in 30mm radius mild or stainless steel
•Visible cutting line
•Continuous metal curl in one direction for easier operation
•The deepest cutting capacity of any 305mm slide saw on the market, cutting a huge 115mm deep
•Powerful motor 1,650W
•Precision bevel cutting 45° both left and right, with positive stop at 33.9° ideal for crown moulding
•Mitre cutting is a breeze with the base rotating 52° right and 47° to the left with positive stops at all common angles
JS3200 3.2mm Shears |
|
| UT120 Power Mixer |
|
|
|
|
|
|
•For heavy duty cutting up to 3.2mm mild steel and 2.5mm stainless steel
•Blades have 4 cutting edges each
•
•Ball and needle bearing construction for long tool life
•Highly visible sight line for precise following of patterns
•Dial up variable speed control makes easy batch mixing and consistency in materials
•Electronic speed control for soft start up, constant speed,
•Thermal and current overload protection for long durability
•Full metal gearbox
•Lock on switch
LC1230 305mm Metal Cutting Saw |
|
| NHP1310 13mm 2 Speed Hammer Drill |
|
|
|
|
|
|
•Powerful 1,750W motor
•Lock off button prevents accidental starting
•
•Large cast aluminium base for stability
•Externally accessible brushes for easy maintenance
•Powerful 600W motor
•Quick action change dial for hammer and rotation or rotation only
•Ergonomic handle design for comfort and control
•2 speed gear selection with variable speed in both ranges gives you greater control and accuracy
Page 38 | United Tools National Catalogue 2006 |