Fastening Solutions™
FinishPro®35
15 Gauge Angled Finish Nailer
Adjustable Exhaust Quiet design
Soft Grip Reduces fatigue, increases productivity
Adjustable
Drives nails to a consistent and controllable depth
Protects work surface
Angled Magazine
For tight spaces
No-Mar Pad Protects woodwork
Always read the Operators Manual and Safety Instructions with all tools to ensure proper use and safety precautions or contact SENCO for more information on our trigger systems. Choose the right trigger system for your specific needs!
For additional information on how SENCO Fastening Solutions will save you time, reduce costs, and increase quality, call our
Visit our web site at: www.senco.com
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in the following a sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applications.
©2005 SENCO Products, Inc. | www.senco.com | Safety First. | The only way to work.® |