KNOW YOUR HAMMER DRILL
See Figure I.
Before attempting to use your hammer drill, familiarize yourself with all operating features and safety requirements. See Figure 1.
_i CAUTION: Carefully read through this entire operator'smanual before using your new drill. Pay
close attention to the Rules For Safe Operation, Warnings, and Cautions. If you use your drill properly and only for what it is intended, you will enjoy years of safe, reliable service.
ELECTRICAL CONNECTION
Your hammer drill has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A voltage drop of more than 10 percent will cause a loss
of power and the motor will overheat. If your tool does not operate when plugged into an outlet,
the power supply.
DEPTH
GAGE CLAMP
AUXILIARY
HANDLE
CHUCKKEY
CHUCKKEY
STRAP
APPLICATIONS
(Use only for the purposes listed below)
•Hammer drilling in concrete and masonry.
•Drilling in wood.
•Drilling in ceramics, plastics, fiberglass, and laminates.
•Drilling in both hard and soft metals.
•Using driving accessories, such as driving screws with screwdriver bits.
PRODUCT SPECIFICATIONS |
| |
Chuck Capacity | ..................................... | 5/64 in. to 1/2 in. |
Input | 120 Volts, AC, 60 Hz | |
Rating: | 6.0 Amperes | |
No Load Speed | .......................................... | |
Hammer Speed | ......................................... | |
Hammer Travel | .......................................................... | 025 |
Switch | Variable Speed/Reversible | |
DEPTH | ADJUSTMENT | LEVEL |
GAGE ROD | BUTTON |
|
LEVEL
LOCK-ON
SWITCH
TRIGGER
FORWAR_REVERSE
LEVER
Fig. 1
_IL WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
Page 6