UNPACKING
Your drill press is shipped complete in one container. Carefully unpack the drill press and all loose items from the container. Figure 2 illustrates the drill press and all loose items supplied with the machine. 
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE DRILL PRESS
TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE ENTIRE INSTRUCTION MANUAL.
1
52
6
4
7
8 |
| 10 |
| 9 | 3 |
|
|
Fig. 2
1- Drill Press Head and Motor
2- Column and Base Flange
3- Base
4- Table
5- Clamp Handle
6- Pinion Shaft Handles (3)
7- Chuck
8- Chuck Key
9- Wrench
10 - 20mm (3/4" ) long Hex Head Cap Screws (3)
4