Non-Redundant DAS Setup Details
Server 1 Server 3 Server 4 Server 2
FIGURE 5 Non-Redundant DAS Connections
TABLE 2 Setup Summary for Non-Redundant DAS
|
| Secondary ID |
Channel Number | Primary ID Number | Number |
|
|
|
0 | 40 | N/A |
1 | 43 | N/A |
2 | 14 | N/A |
3 | 14 | N/A |
4 | 44 | N/A |
5 | 47 | N/A |
|
|
|
The general procedure for creating this configuration follows.
1.Check the position of installed SFP modules. Move or add SFP modules as necessary to support the connections needed.
2.Connect expansion units if needed.
3.Configure cache optimization
4.Create one Logical Drive for each server and configure spare disks.
14 Sun StorEdge 3000 Family Best Practices Manual • October 2003