GE dimensions JDP39WW-30 Drop-In Electric Range, Dimensions in inches, Revised 9/97

GE Appliances

JDP39WW—30" Drop-In Electric Range

Dimensions (in inches)

30" to

bottom of

cabinet

over

range

Countertop Cutout Top View

Inside back wall of cabinet or rear wall

1-1/2" MIN. 5/16" MIN. Flat

		30
	26"
	(To front of
	door handle)
30		23-3/16"
		MIN.
		For best fit
	30-1/4	30"
		Exact
		between
	30-1/8	cabinets

18

22" MIN.

Flat Counter

Counter overhang (1-1/4" Standard)

Adjoining

vertical

cabinet

or wall

above

countertop

3" MIN. (Both sides)

29-1/4"
		Exact
	smooth cut		22-13/16	Front
	3/8		1-1/8	Face of
				Cabinet

30" Exact

smooth cut

Overhang

		Base	4" x 4"
		panel	Junction box
			in adjoining
	24-5/8"		cabinet or
	(To front edge of door		under cabinet
			floor
	excluding handle)
18-3/4

If countertop edge is formed, this dimension must extend to flat area

KW Rating

240V	11.6
208V	8.7

Note: Cabinets installed adjacent to drop-in ranges must have an adhesion spec of at least 194°

For answers to your Monogram,®GE Profile Performance Series,™ GE Profile,™ GE, Hotpoint and RCA appliance questions, call GE Answer Center® service, 800.626.2000.

	All GE ranges are equipped with
	an Anti-Tip device. The installation		Listed by
	of this device is an important,
			Underwriters
	required step in the installation
		R	Laboratories
Revised 9/97	of the range.

Important: 30" Drop-In Ranges are designed to hang from the countertop. It does not rest on the floor. For installation alternatives, refer to installation instructions packed with product.

Note: 30" Drop-In Electric Ranges conform to U.L. requirements for 3" minimum spacing between range and side wall above countertop.

Installation Information: Before installing, consult installation instructions (Pub. No. 31-10129) packed with product for current dimensional data.