Intel SSR212MC2 manual Get the IP address, StorTrends iTX

Page 14

StorTrends® iTX Installation and Login Intel® Server System SSR212MC2

Step

Step

7

8

Description

system for installation of StorTrends iTX.

Note: In StorTrends iTX 2.7.10.19 and older versions, if StorTrends iTX discovers two notebook hard disk drives, it will not prompt at all.

Description

The StorTrends iTX installation takes approximately 30 minutes. Various screens throughout the installation, and at certain times there will be a long period where only a blank screen will appear. However, do not try to do anything; leave the system alone until the StorTrends iTX Installation CD ejects, and a message is displayed that the installation is complete.

Press the <ENTER> key to reboot.

StorTrends iTX 2.7

Complete

Congratulations, your AMI StorTrends installation is complete.

Remove any media used during the installation process and press <Enter> to reboot your system.

Reboot

<Enter> to reboot

Congratulations! StorTrends iTX has been successfully installed on your Intel® Server System SSR212MC2. At this point, the external USB CD-ROM drive can be physically disconnected.

Get the IP address

Once the Intel® Server System SSR212MC2 has fully booted into StorTrends iTX, the following screen (shown below) will be displayed. Write down the IP Address listed in the “Ip Address” field. If both internal NICs are connected to your network, two IP Addresses will be displayed.

15

Image 14
Contents AMI StorTrends iTX Installation and Login Page Page Contents Page Hardware Components Software Used in the InstallationHardware Used in the Installation About StorTrends iTXObtaining Software Software EnvironmentStorTrends iTX Installation OverviewMust be Configured to Boot from this USB CD-ROM Drive Attach a Keyboard, Monitor and External USB CD-ROM Drive Installation ProcedureRemove Any PCI NIC Add-on Cards Setup Step Array Get the IP address StorTrends iTXStop Logging on to the StorTrends iTX Storage Appliance Page Using the Quick Start Setup Wizard Step One Quick Start Setup Wizard Step Two RAID LevelStep Three SAN or NAS or Both Step Four Allocating Space Step Five Summary View Page Page Step Six All Done No Errors Using the Advanced Setup Wizard Step One Advanced WizardSelect the Disks Step Two Create a New Storage PoolStep Three Select Pool Set the RAID Levels Step Four Configure SAN Volume Type in the Storage Pool’s NameEnter Volume Name Enter Volume SizeSelect SAN as the Dialect Type Step Five Configure NAS VolumeSelect Thin or Exact Provisioning Create Target and Target NameEnter Volume Name Step Six Summary View and Status Select NAS as the Dialect TypeCreate Share and Share Name Step Seven All Done No Errors Appendix a Storage Appliance Configuration Appendix B Updating an Evaluation License OverviewLeft-click the Update License button Updating an Expired LicensePage Additional Documentation
Related manuals
Manual 26 pages 41.33 Kb

SSR212MC2 specifications

The Intel SSR212MC2 is a powerful storage solution designed for large-scale data centers, enterprise applications, and high-performance computing environments. It leverages Intel's state-of-the-art technologies and engineering to deliver exceptional performance, reliability, and efficiency.

One of the main features of the SSR212MC2 is its ability to provide high-density storage while maintaining energy efficiency. The system supports a variety of hard disk drives (HDDs) and solid-state drives (SSDs), allowing organizations to tailor their storage solutions according to their specific needs. The chassis can accommodate a staggering number of drives, maximizing the utilization of space and enabling the management of large datasets effortlessly.

With a focus on performance, the SSR212MC2 employs advanced data path technologies to deliver rapid read and write speeds. This is crucial for applications that require quick data access, such as databases, analytics, and virtualization. The system is designed with an optimized architecture that reduces latency and boosts throughput, ensuring that data is available when needed.

Reliability is another hallmark of the SSR212MC2. Intel integrates multiple redundancy features into the design, including hot-swappable drive bays, which allow for hard drives to be replaced without shutting down the system. This minimizes downtime and enhances operational continuity. Moreover, the intelligent thermal management system ensures that the components remain within optimal temperature ranges, further increasing the longevity of the hardware.

Scalability is a significant advantage of the SSR212MC2. As businesses grow and data demands increase, organizations can expand their storage capabilities by seamlessly integrating additional drives and leveraging Intel's advanced virtualization technologies. This adaptability makes it suitable for various workloads, whether handling big data analytics or serving as the backbone for cloud services.

In summary, the Intel SSR212MC2 is a robust storage solution that embodies Intel's commitment to innovation and excellence. With its high capacity, exceptional performance, reliability features, and scalability options, it is designed to meet the demanding needs of modern enterprises and help businesses thrive in an increasingly data-driven world. Whether for small enterprises or large-scale data centers, the SSR212MC2 stands out as a leading option for effective data management and storage solutions.