Call 1-800-366-7278 for Service Parts
Refer to Service Parts Drawing for full listing of Service Parts
To reinstall the slide, place the slide in the appropriate position in the unit. Pull it toward the front of the unit until the spring retainer snaps into position and secures the slide.
HARDWARE:
_Li_' _;_,,.2_ _
!Y_%, ,_._.;,:_
_C_7/_ _;j_<4_ |
SIDE HANDLE ATTACHMENT:
NOTE: Holes in the handle are tapped requiring no nuts for installation.
•Attach the side handle using (4)
3/4 phillips screws. Do not over tighten screws.
\
CASTER INSTALLATION:
NOTE: Use adequate manpower for this operation.
•Lay the cart down on its back. Use packaging material to protect the paint finish.
•Mount both swivel casters on the same side of the cart.
•Attach each caster using (4)
•Wrench tighten all screws.
•Return the cart to its upright position.
REMOVING AND INSTALLING
DRAWERS:
•Empty the drawer.
•Fully extend the drawer.
•Depress the release tab on both sides, (this allows the slides to ride over the stops). Pull out to remove
•To reinstall, carefully align the slides and slowly push the drawer into the unit until the drawer stops.
Release
Left
Right
•To remove the slide from the unit, first remove the drawer (follow the procedure above). Lift and hold the spring retainer, and push the slide upward. The slide may now be removed.
•For casters, use high quality bearing grease, (yearly).
•Lubricate the slides, (twice yearly).
•Lubricate lock with graphite, (yearly).
•Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water.
•Auto wax wilt preserve the storage unit's luster finish. Apply the wax as to a car. The wax wilt also help protect the unit against scratches.
•Grease and oil can be removed with most standard cleaning fluids. For
safety, use a nonflammable cleaning fluid.
•If drawer liners are supplied, it is
recommended they are used to protect the finish inside the drawers and to
make the drawers easier to clean. The
drawer liners may be cleaned with soap and water.
/
/
Spring
Retainer
3 | 4 |