Dell MD1400, MD1420 manual Obtaining Technical Assistance Technical Specifications

Page 6

Rack

Describes how to install your system into a rack. This document is shipped with

Installation

your rack solution.

Instructions

 

Deployment

Provides information about cabling your system and the installation and initial

Guide

configuration of your system. This document is available online at dell.com/

 

support/manuals.

NOTE: Always check for updates on dell.com/support/manuals and read the updates first because they often supersede information in other documents.

NOTE: When upgrading your system, it is recommended that you download and install the latest BIOS, drivers, and systems management firmware on your system from dell.com/support.

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not perform as expected, see your system Owner’s Manual. Dell offers comprehensive hardware training and certification. See dell.com/training for more information. This service may not be offered in all locations.

Technical Specifications

NOTE: The following specifications are only those required by law to ship with your system. For a complete and current listing of the specifications for your system, go to dell.com/support.

Power

AC Power Supply (per power supply)

Wattage

600 W

Heat dissipation

2047 BTU/hr (redundant, 600 W power supply)

NOTE: Heat dissipation is calculated

 

using the power supply wattage

 

rating.

 

Voltage

100–240 V AC, autoranging, 50/60 Hz

NOTE: This system is also designed to be connected to IT power systems with a phase to phase voltage not exceeding 230 V.

DC Power Supply (per power supply)

Wattage

Heat dissipation

NOTE: Heat dissipation is calculated using the power supply wattage rating.

700 W

2388 BTU/hr (redundant, 700 W power supply)

Voltage

–(48–60) V DC

6

Image 6
Contents Page Page Connecting The Power Cables Unpacking a Rack SystemSecuring The Power Cables Turning On The SystemInstalling The Optional Bezel Complete The Operating System SetupObtaining Technical Assistance Technical Specifications Temperature Maximum operation ambient temperature
Related manuals
Manual 37 pages 623 b

MD1420, MD1400 specifications

The Dell MD1400 is a robust and versatile storage solution designed to meet the demands of modern data-intensive environments. It is particularly well-suited for organizations requiring high-performance storage that seamlessly integrates with existing infrastructures. The MD1400 features a compact 2U form factor, which allows for efficient use of rack space while ensuring ample storage capabilities.

One of the standout features of the MD1400 is its impressive scalability. Supporting up to 84 drives in a single rack, the system can accommodate a variety of drive types, including traditional spinning disks (HDDs) and solid-state drives (SSDs), enabling users to optimize performance based on their specific needs. The system is built to support both SAS and SATA interfaces, providing flexibility in drive selection and deployment.

The Dell MD1400 also incorporates advanced RAID technology, enabling users to implement data protection strategies that align with their organizational policies. With support for multiple RAID levels, including RAID 0, 1, 5, 6, 10, and 50, organizations can choose the optimal configuration to balance performance and data redundancy. This versatility ensures that mission-critical applications remain robust and can recover rapidly from hardware failures.

In terms of connectivity, the MD1400 utilizes dual controllers with redundant power supplies, ensuring high availability and minimal downtime. The dual-controller architecture allows for load balancing across multiple paths, which not only enhances performance but also ensures that data remains accessible even in the event of a controller failure.

The management of the MD1400 is another strong point, featuring an intuitive graphical user interface that simplifies storage configuration, monitoring, and maintenance tasks. The system supports various management protocols, providing seamless integration with existing IT ecosystems and making it easier for administrators to manage their storage resources effectively.

Additionally, the Dell MD1400 is designed with energy efficiency in mind. With options for low-power drives and efficient cooling mechanisms, organizations can reduce their total cost of ownership while contributing to sustainability initiatives.

In summary, the Dell MD1400 is a powerful storage solution that offers scalability, performance, and advanced data protection features. Its dual-controller architecture, flexible drive options, and user-friendly management make it an excellent choice for businesses looking to enhance their storage capabilities while ensuring data integrity and availability. Investing in the MD1400 allows organizations to stay ahead in an ever-evolving digital landscape.