Ryobi P230 manual Installing Bits, Removing Bits

Page 13

OPERATION

BIT STORAGE

See Figure 5.

When not in use, bits provided with the tool can be placed in the storage area located at the bottom of the tool handle.

INSTALLING BITS

See Figure 6.

nLock switch trigger on the tool by placing the direction of rotation selector in center position.

nSlide the coupler forward and hold in position.

nInsert bit straight into coupler.

nSlide the coupler back slowly and release.

REMOVING BITS

See Figure 6.

nLock switch trigger or the drill by placing the direction of rotation selector in center position.

nSlide the coupler forward and hold in position.

nPull bit straight out of coupler.

DRIVE BIT

BIT STORAGE AREA

ADAPTOR

 

 

 

 

BIT

Fig. 5

ADAPTOR

 

 

BIT

 

 

COUPLER

Fig. 6

13

Image 13
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesSafety Rules for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Switch Lock Product SpecificationsSwitch Trigger Know Your Impact DriverOperation AssemblyUnpacking Packing ListCharging a Cool Battery Pack Charging the Battery PackTo Install Battery Pack Charging a HOT Battery PackTo Remove Battery Pack BUILT-IN Coupler ReversibleRemoving Bits Installing BitsGeneral Maintenance MaintenanceBattery Pack Removal Preparation for Recycling BatteriesPage Service Model NO. and Serial no