ELECTRICAL
EXTENSION CORDS
When using a power tool at a considerable distance from the power source, use an extension cord heavy enough to carry the current that the tool will draw. An undersized extension cord will cause a drop in line voltage, resulting in a loss of power and causing the motor to overheat. Use the chart provided below to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter's Laboratories (UL) should be used.
ELECTRICAL CONNECTION
Your grinder has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet,
Length of Extension Cord | Wire Size (A.W.G.) |
Up to 25 | 16 |
26 to 50 | 14 |
51 to 100 | 12 |
When working with the tool outdoors, use an extension cord that is designed for outside use. This is indicated by the letters WA on the cord's jacket.
Before using an extension cord, inspect it for loose or exposed wires and cut or worn insulation.
CAUTION:
Keep the cord away from the work area and position the cord so that it will not be caught on materials or other objects during grinding.
UNPACKING
With the exception of the side handle and accessory wheels, your angle grinder has been shipped completely assembled.
■Carefully remove the grinder and accessories from the box. Make sure that all items listed in the packing list are included.
■Inspect grinder carefully to make sure no breakage or damage has occurred during shipping.
■If any parts are damaged or missing, call
■Do not discard the packing material until you have carefully inspected and satisfactorily operated grinder.
PACKING LIST
Angle Grinder with Guard
Carrying Case
Grinding Wheel (1)
Wire Wheel Brush (1)
Abrasive Mop Disc (1)
Side Handle
Wrench
Operator's Manual
Warranty Registration Card
WARNING:
If any parts are missing, do not operate your grinder until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
Page 7