Adjustable Torque Clutch, Adjusting Torque

OPERATION

ADJUSTABLE TORQUE CLUTCH

See Figure 12.

When using the drill-driver for various driving applications, it becomes necessary to increase or decrease the torque in order to help prevent the possibility of damaging screw heads, threads, workpiece, etc. In general, torque should correspond to the intensity of the screw diameter. If the torque is too high or the screws too small, the screws may be damaged or broken.

The torque is adjusted by rotating the torque adjustment ring. The torque is greater when the torque adjustment ring is set on a higher setting. The torque is less when the torque adjustment ring is set on a lower setting.

The proper setting depends on the type of material and the size of screw you are using.

ADJUSTING TORQUE

nIdentify the twenty four torque indicator settings located on the front of the drill.

nRotate adjusting ring to the desired setting.

•	1	- 4			For driving small screws
•	5	- 8			For driving screws into soft material
•	9	- 12			For driving screws into soft and hard
					materials
•	13		- 16		For driving screws in hard wood
•	17		- 20		For driving large screws
•	21		- (	)	For heavy drilling

	TO DECREASE	ADJUSTING
		RING
	TORQUE

TO INCREASE

TORQUE

Fig. 12