Ryobi D46C manual Assembly, Operation

Page 9

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

Drill

Double Ended Bits (2)

Operator’s Manual

Case

WARNING:

If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.

WARNING:

Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

OPERATION

WARNING:

Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this tool for the purposes listed below:

Drilling in wood

Drilling in ceramics, plastics, fiberglass, and laminates

Drilling in metals

Mixing paint

SWITCH TRIGGER

See Figure 2.

To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.

VARIABLE SPEED

The variable speed switch delivers higher speed and torque with increased trigger pressure and lower speed with decreased trigger pressure.

NOTE: You might hear a whistling or ringing noise from the switch during use. Do not be concerned; this is a normal part of the switch function.

DIRECTION OF

ROTATION SELECTOR

FORWARD/REVERSE REVERSE LOCK-ON BUTTON

FORWARD

SWITCH TRIGGER

Fig. 2

 

9

Image 9
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction WarrantyElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Double Insulation ElectricalElectrical Connection Extension CordsFeatures Operation AssemblyLock Tighten Chuck Collar BIT Storage Removing Bits Installing BitsAdjustable Torque Clutch Adjusting TorqueDrilling Maintenance General MaintenanceLubrication Mallet Chuck Jaws HEX KEY Page Service Model NO. and Serial no