Ryobi manual Ryobi 3/8 in. DRILL-DRIVER Model NO. D40, Description Quan

Page 13

RYOBI 3/8 in. DRILL-DRIVER – MODEL NO. D40

The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in. DRILL-DRIVERor when ordering parts.

SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS

1

2

3

SEE NOTE "A"

PARTS LIST

Key No.	Part No.	Description	Quan.
1	9418678	Data Plate	1
2	9418536	Logo Plate	1
3	6903201	3/8 in. Chuck	1
	983000-032	Operator’s Manual

NOTE: "A"– The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest authorized service center.

13

Image 13

Contents Thank YOU for Buying a Ryobi DRILL-DRIVER Save this Manual for Future ReferenceIntroduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesAdditional Rules For Safe Operation Symbol Name DESIGNATION/EXPLANATION SymbolsFeatures Operation Product Specifications DRILL-DRIVERApplications LOCK-ON ButtonReversible Installing BitsDrilling Removing BitsWrong Chuck Removal Level Drilling To Retighten a Loose Chuck LevelGeneral MaintenanceLubrication Extension CordsPage See Back page for Parts Ordering Instructions See Note a Ryobi 3/8 in. DRILL-DRIVER Model NO. D40Description Quan Ryobi TECHNOLOGIES, INC Service Model NO. and Serial no