Ryobi RS281VS manual Attaching Adhesive Sanding Discs, Attaching Hook and Loop Sanding Discs

Page 10

OPERATION

ATTACHING ADHESIVE SANDING DISCS

See Figure 2.

nUnplug the sander.

nPeel the paper backing from the sanding disc.

nAlign the holes in the sanding disc with the holes in the backing pad.

NOTE: Line up the holes in the sanding disc with the holes in the backing pad in order for the dustless feature to function properly.

nPress the sticky side of the sanding disc against the backing pad as firmly as possible.

NOTE: It is recommend that you clean the backing pad occasionally by brushing it lightly with a small brush. Dust buildup on the backing pad could cause the sanding disc to not stick properly.

ATTACHING HOOK AND LOOP SANDING DISCS

See Figure 3.

nUnplug the sander.

nPeel the paper backing from the conversion pad.

nAlign the holes in the conversion pad with the holes in the backing pad.

NOTE: Line up the holes in the conversion pad with the holes in the backing pad in order for the dustless feature to function properly.

nPress the sticky side of the conversion pad against the backing pad as firmly as possible.

nAlign the holes in the hook and loop sanding disc with the holes in the conversion pad.

NOTE: Line up the holes in the sanding disc with the holes in the conversion pad in order for the dustless feature to function properly.

nPress the fuzzy side of the sanding disc against the conversion pad as firmly as possible.

NOTE: You can reuse hook and loop type sanding discs for the life of the sanding abrasive. We recommend that you clean the conversion pad occasionally by brushing it lightly with a small brush to provide for their best adhesion.

ADHESIVE

SANDING DISC

BACKING PAD

HOOK AND

LOOP SANDING

DISC

CONVERSION

PAD

BACKING PAD

Fig. 2

Fig. 3

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionPersonal Safety General Safety RulesElectrical Safety Work AreaSpecific Safety Rules ServiceSymbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Electrical Connection Electrical Double Insulation Extension CordsFeatures Assembly OperationAttaching Adhesive Sanding Discs Attaching Hook and Loop Sanding DiscsDustless Sanding Adjusting the SpeedTurning the Sander ON/OFF See Figures 4Attaching the Sander to a Vacuum To Attach the Dust BAG AssemblyTo Empty the Dust BAG Assembly See Figures 6Operating the Sander See Figures 9General Maintenance MaintenanceAccessories LubricationPage Service Model NO. and Serial no
Top Page Image Contents